Best Technical Papers at IPC APEX EXPO 2023 Selected
January 16, 2023 | IPCEstimated reading time: 2 minutes
The best technical conference papers of IPC APEX EXPO 2023 have been selected. Voted on through a ballot process by members of the IPC APEX EXPO Technical Program Committee (TPC), the paper authors will be recognized during show opening remarks on Tuesday, January 24.
“All of the papers making up the 2023 IPC APEX EXPO Technical Conference represent the highest quality technical content from authors around the world,” said Stan Rak, co-chair of the TPC. “The diversity of the presenting authors is also impressive: 18 countries are represented by presenting authors. Fifteen authors are next generation—five years or less in the industry -- and 27 presenting authors hold doctoral degrees. The commitment to quality is reflected in this year's selection of Best of Conference, NextGen, and Best Student Research papers. We extend our congratulations to all the award winners."
Taking top honors in the Best of Conference category, the winning papers are:
- “Risk Prediction of Electrochemical Migration on Electronic Control Units – A Practical Approach” by Lothar Henneken, Ph.D., Robert Bosch GmbH. This paper will be presented during Technical Conference Session S25: QRTI-Assembly Risk Prediction and Failure Analysis, on Wednesday, January 25.
- “Root Cause Analysis and Risk Assessment of Multilayer Ceramic Capacitor Flexural Crack Propagating Fault” by Eric Campbell, IBM Corporation. His co-authors are Jennifer Bennett, Jim Bielick, Mehdi Hamid, and Kevin O’Connell, IBM Corporation This paper will be presented during Technical Conference Session S13: QRTI -- Printed Board Reliability, on Wednesday, January 25.
- “High-Resolution Physical Analyses of Microvia-Target Pad Interfaces” by Dr. Martin Leung, Ph.D, The Aerospace Corporation. His co-authors are Scott Sitzman, Eric Frasco, Zachary Lingley, Ph.D., Gary Stupian, Ph.D., James Parke, and Shawn Ashley, The Aerospace Corporation. This paper will be presented during Technical Conference Session S11: HDI1 -- Microvia Analysis and Modeling, on Tuesday, January 24.
The NextGen best paper is awarded to:
- “Temperature Behavior of FR4 Substrates when Processing during Laser Depaneling” by Patrick Stockbruegger, LPKF Laser & Electronics AG. His co-author is Stephan Schmidt, LPKF Laser & Electronics Inc. This paper will be presented during Technical Conference Session S09: A-LASER Assembly Laser Processing, on Tuesday, January 24.
Selected for the Student Research award, the best paper is:
- “Solvent Free Copper Extraction” by Derek Lovejoy, University of Massachusetts/GreenSource Fabrication LLC. This paper will be presented during Technical Conference Session S08: BF-MAT-2 Printed Board Platings and Finishes 2, on Tuesday, January 24.
All technical conference papers were evaluated using a stringent peer review process examining their technical content, originality, test procedures and data used to deduce conclusions, quality of illustrations and the clarity and professionalism of writing as well as value to the industry.
To register for the IPC APEX EXPO technical conference or for more information on all the activities taking place, including professional development courses, exhibition, keynote presentations, networking activities and more, visit www.IPCAPEXEXPO.org.
Suggested Items
Warm Windows and Streamlined Skin Patches – IDTechEx Explores Flexible and Printed Electronics
04/26/2024 | IDTechExFlexible and printed electronics can be integrated into cars and homes to create modern aesthetics that are beneficial and easy to use. From luminous car controls to food labels that communicate the quality of food, the uses of this technology are endless and can upgrade many areas of everyday life.
Book Excerpt: The Printed Circuit Assembler’s Guide to... Factory Analytics
04/24/2024 | I-Connect007 Editorial TeamIn our fast-changing, deeply competitive, and margin-tight industry, factory analytics can be the key to unlocking untapped improvements to guarantee a thriving business. On top of that, electronics manufacturers are facing a tremendous burden to do more with less. If you don't already have a copy of this book, what follows is an excerpt from the introduction chapter of 'The Printed Circuit Assembler’s Guide to... Factory Analytics: Unlocking Efficiency Through Data Insights' to whet your appetite.
Listen Up! The Intricacies of PCB Drilling Detailed in New Podcast Episode
04/25/2024 | I-Connect007In episode 5 of the podcast series, On the Line With: Designing for Reality, Nolan Johnson and Matt Stevenson continue down the manufacturing process, this time focusing on the post-lamination drilling process for PCBs. Matt and Nolan delve into the intricacies of the PCB drilling process, highlighting the importance of hole quality, drill parameters, and design optimization to ensure smooth manufacturing. The conversation covers topics such as drill bit sizes, aspect ratios, vias, challenges in drilling, and ways to enhance efficiency in the drilling department.
Elevating PCB Design Engineering With IPC Programs
04/24/2024 | Cory Blaylock, IPCIn a monumental stride for the electronics manufacturing industry, IPC has successfully championed the recognition of the PCB Design Engineer as an official occupation by the U.S. Department of Labor (DOL). This pivotal achievement not only underscores the critical role of PCB design engineers within the technology landscape, but also marks the beginning of a transformative journey toward nurturing a robust, skilled workforce ready to propel our industry into the future.
Winner of The Science Show Rakett 69 Receives Incap Scholarship
04/24/2024 | IncapThe winner of the Rakett 69 science show, Andri Türkson, who stood out as an electronics enthusiast, received a scholarship from Incap Estonia, along with an internship opportunity in Saaremaa.