iNEMI Publishes Four Roadmap Topics
April 4, 2024 | iNEMIEstimated reading time: 2 minutes
The International Electronics Manufacturing Initiative (iNEMI) announces the availability of the first roadmap topics in the new iNEMI Roadmap format. Printed circuit boards, sustainable electronics, smart manufacturing, and mmWave materials and test are now available online.
“The in-depth content on these topics is intended to help companies align technology progress with their respective commercial interests and to support high-volume manufacturing,” says Francis Mullany, iNEMI Director of Roadmapping. “The new format provides a more structured, accessible view of the roadmap that is easily updated based on market movements and technology innovations. And, of course, the roadmap continues to chart the future evolution of electronics manufacturing in terms of application drivers, technical needs, gaps, and technical solutions over a 10-year horizon to help guide R&D investment decisions by industry as well as public research programs and government agencies.”
Initial Topics Include Technologies Critical to Complex Integrated Systems
This initial wave of roadmap topics focuses on key technologies and cross-cutting topics critical to complex integrated systems (CIS), as discussed in a recent iNEMI/IPC whitepaper “Complex Integrated Systems: The Future of Electronics Manufacturing." The scope of each topic area now available is described below.
Printed Circuit Boards — Printed circuit boards (PCBs) are a fundamental element of a vast range of electronic products. The PCB manufacturing ecosystem must continuously evolve and react to “technology blurring” with respect to substrates. The initial iNEMI Roadmap discussion of this topic covers a broad spectrum: high-speed PCBs and substrates; test, inspection and measurement; and environmental issues. Other topics currently under preparation include microwave and mmWave PCBs, laminate-based semiconductor packaging and PCB design.
Sustainable Electronics — Sustainability in the design, manufacture, use and end-of-life handling of electronics systems is an increasingly important consideration across the entire electronics manufacturing ecosystem. The iNEMI Roadmap currently focuses on the full scope of circularity and on key materials used. A new reporting format gathers information on sustainability hot-spot issues and roadmaps mitigating technologies on a per-substance basis.
Smart Manufacturing — The term “smart manufacturing” encompasses the adoption of informed, intelligent, automated manufacturing processes at factory, enterprise, and ecosystem levels for increased flexibility, resiliency and efficiency. The initial release of roadmap content looks at the central topic of data flow architecture and at the increasingly important issue of security of smart manufacturing systems and data.
mmWave Materials and Test — As part of the 5G/6G MAESTRO project, work on this topic was supported by the National Institute of Standards and Technology’s (NIST’s) Office of Advanced Manufacturing. It considers the challenges posed by the operation of electronics at mmWave frequencies and higher. The focus is on the materials and their characterization and electrical test, primarily for PCBs and packaging substrates.
Publication Schedule
In the coming months, the iNEMI Roadmap will:
Provide qualitative market driver assessments and quantitative requirements for multiple application areas
Map technology gaps and potential solution approaches for other critical technology topics such as board assembly, complex integrated systems, modelling and design
Build a dynamic online presence for the iNEMI Roadmap, collaborating closely with other industry roadmaps
Suggested Items
Latest Test and Inspection Solutions from GOEPEL electronic at SMTconnect 2024
04/29/2024 | GOEPEL electronicGOEPEL electronic will be demonstrating automated test and inspection equipment at SMTconnect, taking place in Nuremberg from June 11 to 13, 2024.
SIA Commends CHIPS Act Incentives for Micron’s Manufacturing Projects in New York and Idaho
04/29/2024 | SIAThe Semiconductor Industry Association (SIA) today released the following statement from SIA President and CEO John Neuffer applauding semiconductor manufacturing incentives announced by the U.S. Department of Commerce and Micron.
Real Time with… IPC APEX EXPO 2024: Tools, Training, and Trends in Manufacturing Engineering
04/25/2024 | Real Time with...IPC APEX EXPOGuest Editor Kelly Dack and Product Specialist Erik Bateham of Polar Instruments discuss Polar's latest technology, including their role in aiding manufacturing engineers. They highlight the advanced capabilities of Polar's tools and the critical role of signal integrity analysis, as well as the importance of accurate modeling in board manufacturing. Polar's unique training approach and demonstration contact details are also explored.
TTM Celebrates the Grand Opening of Its First Manufacturing Facility in Penang
04/25/2024 | TTM Technologies, Inc.TTM Technologies, Inc., a leading global manufacturer of technology solutions including mission systems, radio frequency (RF) components and RF microwave/microelectronic assemblies, and quick-turn and technologically advanced printed circuit boards (PCBs), officially opened its first manufacturing plant in Penang, Malaysia with an investment of USD200 million (approximately RM958 million).
Listen Up! The Intricacies of PCB Drilling Detailed in New Podcast Episode
04/25/2024 | I-Connect007In episode 5 of the podcast series, On the Line With: Designing for Reality, Nolan Johnson and Matt Stevenson continue down the manufacturing process, this time focusing on the post-lamination drilling process for PCBs. Matt and Nolan delve into the intricacies of the PCB drilling process, highlighting the importance of hole quality, drill parameters, and design optimization to ensure smooth manufacturing. The conversation covers topics such as drill bit sizes, aspect ratios, vias, challenges in drilling, and ways to enhance efficiency in the drilling department.