-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueOpportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
Manufacturing Know-how
For this issue, we asked our expert contributors to share their thoughts on the absolute “must-know” aspects of fab, assembly and test that all designers should understand. In the end, we’re all in this together.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Flexdude Abides: PCB Design for Satellites
October 5, 2016 | Andy Shaughnessy, PCBDesign007Estimated reading time: 2 minutes
Tom Woznicki has made a career out of his love for designing flex circuits. Woznicki, also known as “Flexdude,” has focused primarily on flex circuit design since he founded Flex Circuit Design Company in the 1990s, and he designed flex circuits for the Mars rover. But recently, Tom found himself designing rigid PCBs, this time for the TESS satellite. I tracked Tom down via email recently and asked him to discuss his work with TESS, and what it’s like switching between flexible and rigid PCBs.
Andy Shaughnessy: Tom, give us a quick thumbnail sketch of your background and your company.
Tom Woznicki: I almost exclusively design flex circuits and rigid-flex circuits. I have been in the flex industry since 1988 and started my company, Flex Circuit Design Company, in 1992, coming up on 25 years ago! I am a mechanical engineer by education, which I believe really helps me understand the intricacies of flex circuits; they are as much mechanical as electrical. In fact, most flex circuits are electrically simple, but mechanically complex.
Shaughnessy: Now, you’re more identified with flex design, but I understand you designed rigid boards for the upcoming TESS satellite. Tell us about that project.
Woznicki: Yes, for the past two years I have been part of the team working on the TESS satellite. The principal goal of the TESS mission is to detect small planets with bright host stars in the solar neighborhood. I actually designed the early prototype and development PCBs and worked in a support role in the designing the flight boards that are now assembled and in testing.
How did it happen? Once in a blue moon, my flex circuit customers need me for rigid board design help; they need something fast and their PCB designers are busy, or they don’t know any PCB designers and would prefer to work with someone they know. Most times it’s small test boards or interposers, but sometimes it's bigger. As long as we're working with Cadence Allegro or Altium I'm good. (One of the sales reps for Cirexx kids me whenever she sees one of my rigid board designs. "So, you're slumming again, designing PCBs?")
TESS began in a similar way. One of my flex design customer supplies the camera detectors for the project, and they asked if I could help. A TESS scientist had designed the first prototype PCBs on a Mac using a program called Osmond, and they needed someone to bring the design into a mainstream CAD tool and make some changes to that initial design. As I dug into the design changes, it turned out they needed a complete redesign, and of course they needed it in a hurry. I completed that design—it worked fine. Then they asked me to design a microprocessor evaluation board, and after that a spin of the two prototype revisions of the satellite PCBs.
To read this entire article, which appeared in the September 2016 issue of The PCB Design Magazine, click here.
Suggested Items
SMTA’s Conducts First UHDI Symposium
03/29/2024 | Marcy LaRont, PCB007 MagazineSMTA’s first UHDI Symposium in Peoria, Arizona, on Tuesday, March 26 featured a standout full-day technical program with 11 separate presentations on what will be required for our companies to move to ultra HDI manufacturing. The event was the brainchild of Tara Dunn, SMTA director of training and education. It included a compelling and collaborative presentation by David Haboud of Altium, John Johnson of American Standards Circuits, and Chrys Shea of Shea Engineering, who had spent the past several weeks creating and building an appropriate SMT test board vehicle for UHDI, something that was passed around for all conference goers to see and touch.
PCBflow Helps Designers Choose Best Manufacturer for the Job
03/28/2024 | Andy Shaughnessy, Design007 MagazineI recently spoke with a few technologists who have first-hand experience with PCBflow: Susan Kayesar, technical product manager with Siemens; Evgeny Makhline, CTO of Nistec, a CEM based in Israel; and Peter Tranitz, senior director of technology solutions and leader of the IPC Design Initiative. They explain how PCBflow functions, from the designer’s and manufacturer’s viewpoint, and how this database helps break down the wall between these stakeholders.
Elementary, Mr. Watson: Ensuring Design Integrity
03/28/2024 | John Watson -- Column: Elementary, Mr. WatsonBack in February, many of us watched the "Big Game." It reminded me of the saying, “It's not how you start that is important, but rather how you finish." It is perfectly okay when you are talking about sports, you get off to a bad first half and need to recover in the second half. However, when it comes to PCB design, this is not a good practice. If things start badly, they usually don't recover. They continue down that same path, costing more money and losing design time.
Arrow Electronics Launches Intelligent Vision Ecosystem
03/27/2024 | BUSINESS WIREArrow Electronics, Inc. is utilizing the onsemi Imager Access System (IAS) module standard for developing intelligent vision solutions for use in robotics, machine vision, commercial cameras and other uses.
Dymax Will Exhibit Light-Cure Solutions for Today’s Electronics at IPC APEX 2024
03/26/2024 | DymaxDymax, a leading manufacturer of rapid and light-curing materials and equipment, will exhibit at the IPC APEX EXPO 2024 in Anaheim, CA, April 9-11.