Bendable Electronic Paper Displays Whole Colour Range
October 14, 2016 | CHALMERS UNIVERSITY OF TECHNOLOGYEstimated reading time: 2 minutes
Less than a micrometre thin, flexible and giving all the colours that a regular LED display does, it still needs ten times less energy than a Kindle tablet. Researchers at Chalmers University of Technology have developed the basis for a new electronic paper. Their results were recently published in the high impact journal Advanced Materials.
When Andreas Dahlin, Assistant Professor at Chalmers University of Technology, and his PhD student Kunli Xiong were working on placing conductive polymers on nanostructures they discovered that the combination would be perfectly suited to creating electronic displays as thin as paper. A year later the results were ready for publication. A material that is less than a micrometre thin, flexible and giving all the colours that a standard LED display does while needing ten times less energy than a Kindle tablet.
“The ’paper’ is similar to the Kindle tablet. It isn’t lit up like a standard display, but rather reflects the external light which illuminates it. Therefore it works very well where there is bright light, such as out in the sun, in contrast to standard LED displays that work best in darkness. At the same time it needs only a tenth of the energy that a Kindle tablet uses, which itself uses much less energy than a tablet LED display”, says Andreas Dahlin.
It all depends on the polymers’ ability to control how light is absorbed and reflected. The polymers that cover the whole surface lead the electric signals throughout the full display and create images in high resolution. The material is not yet ready for application, but the basis is there. The team has tested and built a few pixels. These use the same red, green and blue (RGB) colours that together can create all the colours in standard LED displays. The results so far have been positive, what remains now is to build pixels that cover an area as large as a display.
“We are working at a fundamental level but even so, the step to manufacturing a product out of it shouldn’t be too far away. What we need now are engineers”, says Andreas Dahlin.
One obstacle today is that there is gold and silver in the display.
“The gold surface is 20 nanometres thick so there is not that much gold in it. But at present there is a lot of gold wasted in manufacturing it. Either we reduce the waste or we find another way to reduce the production cost”, says Andreas Dahlin.
Andreas Dahlin thinks the best application for the displays will be well-lit places such as outside or in public places to display information. This could reduce the energy consumption and at the same time replace signs and information screens that aren’t currently electronic today with more flexible ones.
Suggested Items
North American PCB Industry Sales Down 11.6% in February
03/25/2024 | IPCIPC announced today the February 2024 findings from its North American Printed Circuit Board (PCB) Statistical Program. The book-to-bill ratio stands at 1.07.
North American EMS Industry Up 4.1% in February
03/25/2024 | IPCIPC announced the February 2024 findings from its North American Electronics Manufacturing Services (EMS) Statistical Program. The book-to-bill ratio stands at 1.22.
Intraratio Enhances MES + Yield / IoT Management with New Advanced Manufacturing Analytics
03/22/2024 | IntraratioIntraratio announced AICard, which harnesses the power of artificial intelligence and machine learning to empower manufacturers to make informed decisions quickly and accurately regarding product quality and manufacturing line performance and optimization.
Intel, Biden Admin Announce up to $8.5 Billion in Direct Funding Under the CHIPS Act
03/20/2024 | IntelThe Biden-Harris Administration announced today that Intel and the U.S. Department of Commerce have signed a non-binding preliminary memorandum of terms (PMT) for up to $8.5 billion in direct funding to Intel for commercial semiconductor projects under the CHIPS and Science Act.
Expanded Semiconductor Assembly and Test Facility Database Tracks OSAT and Integrated Device Manufacturers in 670 Facilities
03/18/2024 | SEMIThe new edition of the Worldwide Assembly & Test Facility Database expands coverage to 670 facilities, 33% more than the previous release, including 500 outsourced semiconductor assembly and test (OSAT) service providers and 170 integrated device manufacturer (IDM) facilities, SEMI and TechSearch International announced.