Sensible Design: The Little Guide to Resins


Reading time ( words)

Over past months, this column has seen Electrolube’s Phil Kinner provide The PCB Design Magazine readers with information, guidance and practical tips on the uses and application of conformal coatings. He now hands over the reins to me, and I plan to do the same for resins, starting this month with a “back to basics” piece that questions the core rationale for potting—why and how do we do it, and what are we trying to achieve or protect?

First, a little background. I joined Electrolube as global business technical director for the Resins Division in January 2016. I currently head up a team of chemists developing formulations that encompass epoxy, polyurethane and silicone resin systems for encapsulating or potting electrical devices or electronic components in order to protect them against a wide range of environments.

In my previous appointment at Gurit (UK) I held the position of senior product development chemist, responsible for the development of new epoxy and vinyl ester resin systems for aerospace, automotive, engineering and marine composite systems. Prior to this, I worked for 2K Polymer Systems, where I developed civil engineering and structural adhesives, and at SI Group, where I worked on UV curing and high-performance resins.

I have wide experience working within ISO 9000, 14001 and 18001 accredited systems, and I am an expert in vinyl ester resin systems (for which I am in the process of completing a PhD in Polymer Chemistry at Loughborough University). I am a Chartered Chemist, an active member of the Royal Society of Chemistry, and a member of the Society of Adhesion and Adhesives.

Resins: Why, Where and How?

I would like to start this series of columns by going back to basics, questioning the core rationale for potting and encapsulation with resins, their fundamental chemistries and how each resin type differs one from the other—indeed, how their individual properties can be exploited to maximise performance under a wide range of environmental conditions.

Let’s start with moisture, the archenemy of electrical and electronic devices that, quite apart from causing short-circuits, can also lead to premature deterioration of components due to corrosion. Polyurethane resins—usually supplied as two-part products, which, when mixed achieve the desired cure—provide that all-important moisture resistance, as well as excellent electrical insulation, flexibility and good adhesion to most substrates, both metal and plastic. Some polyurethane resin systems provide exceptional resistance to sea water, as well as temperature extremes, making them an ideal choice for marine applications such as sensor encapsulation. A good outdoor example of a polyurethane resin encapsulated component that requires maximum protection against water ingress is an LED lighting unit; these resins are also optically clear and UV stable, making them ideal for the task.

To read this entire article, which appeared in the September 2016 issue of The PCB Design Magazine, click here.

Share

Print


Suggested Items

Designing for Complex PCBs

12/12/2019 | I-Connect007 Editorial Team
The I-Connect007 editorial team sat down with Freedom CAD’s Scott Miller to talk about the industry’s demand for more increasingly complex PCBs, and the challenges this presents. They also discuss Freedom CAD’s in-house training programs, the company’s recent book authored by Scott, and why communication is such an important tool in a PCB designer’s toolbox.

Communication, Part 6: The Importance of Technology Fit

11/08/2019 | Steve Williams, The Right Approach Consulting LLC
In the final installment of this series on how PCB fabricators and designers can better communicate, Bob Chandler from CA Design and Mark Thompson from Prototron Circuits discuss the importance of “technology fit” and how this concept impacts the synergy of the two parties involved.

Meet Our Newest Columnists From NCAB Group

08/31/2019 | I-Connect007
Meet our newest I-Connect007 columnists from NCAB Group! Alifiya Arastu, Jeff Beauchamp, Ruben Contreras, and Harry Kennedy are field application engineers from NCAB Group's technical team. In their columns, they will explore fresh PCB concepts, including medical and telecommunications applications, topics related to RoHS, and much more.



Copyright © 2019 I-Connect007. All rights reserved.