Happy's Essential Skills: Lean Manufacturing
October 19, 2016 | Happy HoldenEstimated reading time: 1 minute
Lean doesn’t have to exist in manufacturing alone. Lean is a fairly recent principle that can apply to all of our goods and services. For those of you not familiar with Lean, I recommend the free E-book Survival Is Not Mandatory: 10 Things Every CEO Should Know about Lean by Steve Williams, a regular columnist for I-Connect007. He thoroughly explains Lean—its history, what it is, why it is important, and how to initiate a program. Steve uses a lot of humorous stories to illustrate his points. On one, he concludes with: “The moral of the story: If Team America doesn’t start working smarter in the manufacturing sector, we will be destined to remain a service nation.”
Another excellent article on Lean was written by Kathy Nargi-Toth in the October 2015 issue of The PCB Magazine.
Introduction
Steve’s and Kathy’s explanation of Lean encompasses:
- Lowering costs by eliminating waste of all sorts (materials, machinery, manpower, methods, measurements, and movements)
- Delivering as soon as needed to eliminate queues, waits and delays
- Six-Sigma quality goals—continuous improvements to zero defects
Lean Management Model
Current descriptions of Lean manufacturing all refer to Toyota Motor Company. While this is its origins and most useful example, car manufacturing is very complex and one involving assembly. I like to call this “the kinematic model” for Lean. This would apply to electronics assembly, as you can always back-up-a-step and repair or rework.
But printed circuit fabrication, like integrated circuit wafer fabrication, is a thermodynamic model, in that the manufacturing steps are irreversible; you cannot go back and un-drill a hole or un-plate the board. Like in thermodynamics entropy, the process goes only in one direction. Thus, Lean for these processes is slightly different from that of assembly.
The Total Lean Management Model aligns all the pillars of Lean in a systematic way under one umbrella, making Lean understanding, learning and execution a smooth methodology.
Editor's Note: This column originally appeared in the September 2016 issue of The PCB Magazine.
Suggested Items
SEMI Applauds U.S. Chips Act Award for Samsung Electronics Facilities to Strengthen Domestic Semiconductor Supply Chain
04/17/2024 | SEMISEMI, the industry association serving the global electronics design and manufacturing supply chain, applauded the United States Department of Commerce’s announcement of a Preliminary Memorandum of Terms for an award under the CHIPS and Science Act to support the expansion of Samsung Electronics’ presence in Texas and the company’s development and production of leading-edge chips.
Ark Electronics Expands Global Manufacturing Factory Network in North America and Europe
04/17/2024 | PRNewswireElectronic Manufacturing Company Ark Electronics recently announced the expansion of its Global Factory Network with the addition of Electronics Manufacturing Service (EMS) capabilities in Mexico and Europe.
SIA Applauds CHIPS Act Incentives for Samsung Manufacturing Projects in Texas
04/16/2024 | SIAThe Semiconductor Industry Association (SIA) released the following statement from SIA President and CEO John Neuffer applauding semiconductor manufacturing incentives announced by the U.S. Department of Commerce and Samsung.
Report Reveals ‘True Impact’ of Manufacturing is Nearly a Quarter of UK GDP
04/15/2024 | Manufacturing Technologies AssociationManufacturing is having a far greater impact on the UK economy than first thought according to a major new report released today.
Design Community Town Hall Review
04/11/2024 | Kelly Dack, CID+, EPTACThe Design Community Town Hall took place on the afternoon of April 10, 2024. I was fortunate to attend this event, which marked an opportunity for members of some newly found design groups to get together and exchange ideas. Peter Tranitz, senior director of solutions for IPC, opened the session with a slide presentation introducing these new groups and members within the solutions department.