A Scientific Response to Mr. Laminate Tells All
November 29, 2016 | Mark Goodwin and Bill Wang, Ventec International GroupEstimated reading time: 3 minutes
We read with interest Doug Sober’s recent Mr. Laminate Tells All column, The Certification of IPC-4101D Polyimide Base Materials: Buyer Beware.
The article raises interesting questions about the IPC 4101 classification system, primarily, how is a pure resin defined?
For thermosetting materials, the “resin system” includes at least a resin and a curing system, which can take many forms—can this be defined as pure?
“Purity” is a term generally applied to single compounds, especially in inorganic chemistry. To broadly apply this term to complex organic resin systems, which may contain multiple curing chemistries, inert and active fillers, and flame retardant components, is stretching the term beyond the breaking point.
Let us consider materials classified under IPC 4101/126 for example. The specification sheet states the following:
The primary resin system is listed as “Epoxy,” with a secondary of multifunctional epoxy or modified epoxy or non-epoxy (max. wt. 5%). However, for base materials’ manufacturers to meet the performance requirements of lead-free FR-4 and high decomposition temperature, it has been standard practice for base materials manufacturers to replace the previously common dicyandiamide curing element with a phenolic resin in /126 materials. The phenolic resin element is typically present in double-digit weight percentage proportions; these products are openly referred to as “phenolic cured epoxies.” If the argument about purity of resins were applied in the same way as in the polyimide example, then all manufacturers of /126 materials should be declared as having a secondary resin system outside of the specification requirements, and would therefore be non-compliant.
The only argument that allows base materials manufacturers to claim /126 compliance with such a high percentage of non-compliant secondary resins relates to the nature of the organic molecule. The argument is that many species may be used in the formulation, but in the final reacted state there is one molecule, which had epoxy functionality prior to curing (by definition, the presence of an epoxy functional group), and can therefore be correctly classed as an epoxy resin. To quote the article, “there is only one big molecule with the largest portion being the polyimide functionality. So it is a pure polyimide at that point. That argument does not hold any water…” We can just as easily replace the term “polyimide” with “epoxy” and we have the statement “there is only one big molecule with the largest portion being the epoxy functionality. So it is a pure epoxy at that point. That argument does not hold any water…” By inference, the author must also support the argument to disbar /126 materials that use a phenolic curing element, which is most, if not all of them.
Polyimide is, by definition, a polymer that contains imide groups. Polyimide resins form a family of chemistries, aliphatic or aromatic; they may be thermoplastic or form part of a thermosetting system and may or may not include flame retardant components. Using the same arguments above, for epoxy, the final reacted state is one molecule that contains a polymer that contained a functional group consisting of two acyl groups bound to nitrogen (an imide). It is just the same argument for /126 epoxies above; what is true for /126 must also be true for /40 /41.
To reinforce this distinction one should also not forget that in the final condition, no functional epoxy or imide groups exist at all as they will have all reacted as part of the crosslinking process. It is truly “one big molecule.”
Far from “using their own rules for substitutions” and saying “you (IPC) cannot stop us,” the laminators concerned (of which Ventec is just one) are applying a consistent and scientifically correct approach to the formulation of both polyimide and epoxy resin systems. And if a “special case” is being argued for /40/41 materials that somehow does not apply to /126 materials, then the buyer must truly beware of using the IPC 4101 slash sheet classification system at all.
Mark Goodwin is CCO, EMEA & Europe with Ventec International Group.
Bill Wang is technical director with Ventec International Group.
Suggested Items
PCBflow Helps Designers Choose Best Manufacturer for the Job
03/28/2024 | Andy Shaughnessy, Design007 MagazineI recently spoke with a few technologists who have first-hand experience with PCBflow: Susan Kayesar, technical product manager with Siemens; Evgeny Makhline, CTO of Nistec, a CEM based in Israel; and Peter Tranitz, senior director of technology solutions and leader of the IPC Design Initiative. They explain how PCBflow functions, from the designer’s and manufacturer’s viewpoint, and how this database helps break down the wall between these stakeholders.
ASMPT to Exhibit Smart Manufacturing at IPC APEX EXPO 2024
03/27/2024 | ASMPTWith its innovative, data-driven Intelligent Factory concept and a comprehensive hardware and software portfolio around SMT production, market and innovation leader ASMPT will be a major presence at the IPC APEX EXPO 2024, the industry’s main event in California.
Mycronic to Showcase More Versatile, High-productivity Assembly Solutions at IPC APEX EXPO 2024
03/27/2024 | MycronicMycronic, the leading Sweden-based electronics assembly solutions provider, will continue to respond to growing customer demand for high-flexibility, high-productivity solutions for zero-defect PCB assembly at IPC APEX EXPO 2024 in Anaheim, CA on April 9 - 11.
TRI Launches New Advanced Packaging 3D CT AXI Solution
03/26/2024 | TRITest Research, Inc. (TRI) proudly announces the launch of the SEMI 3D CT AXI solution, TR7600F3D SII Plus, marking a paradigm shift in precision and reliability for high-reliability electronics manufacturing, such as the Advanced Packaging Industry.
Blackfox Ready for IPC APEX EXPO 2024
03/26/2024 | Andy Shaughnessy, I-Connect007Blackfox Training Institute offers IPC-certified training for a myriad of PCB assembly techniques and standard certifications. With many technologists beginning to eye retirement, this training is at a premium. I recently spoke with Jamie Noland, director of training and education for Blackfox, about the company’s latest educational efforts, and his plans for the upcoming IPC APEX EXPO, where Blackfox will be exhibiting.