Scientists Turn Memory Chips into Processors to Speed Up Computing Tasks
January 3, 2017 | NTUEstimated reading time: 4 minutes
A team of international scientists have found a way to make memory chips perform computing tasks, which is traditionally done by computer processors like those made by Intel and Qualcomm.
This means data could now be processed in the same spot where it is stored, leading to much faster and thinner mobile devices and computers.
This new computing circuit was developed by Nanyang Technological University, Singapore (NTU Singapore) in collaboration with Germany’s RWTH Aachen University and Forschungszentrum Juelich, one of the largest interdisciplinary research centres in Europe.
It is built using state-of-the-art memory chips known as Redox-based resistive switching random access memory (ReRAM). Developed by global chipmakers such as SanDisk and Panasonic, this type of chip is one of the fastest memory modules that will soon be available commercially.
However, instead of storing information, NTU Assistant Professor Anupam Chattopadhyay in collaboration with Professor Rainer Waser from RWTH Aachen University and Dr Vikas Rana from Forschungszentrum Juelich showed how ReRAM can also be used to process data.
This discovery was published recently in Scientific Reports, a peer-reviewed journal under the prestigious Nature Publishing Group.
Current devices and computers have to transfer data from the memory storage to the processor unit for computation, while the new NTU circuit saves time and energy by eliminating these data transfers.
It can also boost the speed of current processors found in laptops and mobile devices by at least two times or more.
By making the memory chip perform computing tasks, space can be saved by eliminating the processor, leading to thinner, smaller and lighter electronics. The discovery could also lead to new design possibilities for consumer electronics and wearable technology.
How the new circuit works
Currently, all computer processors in the market are using the binary system, which is composed of two states – either 0 or 1. For example, the letter A will be processed and stored as 01000001, an 8-bit character.
However, the prototype ReRAM circuit built by Asst Prof Chattopadhyay and his collaborators processes data in four states instead of two. For example, it can store and process data as 0, 1, 2, or 3, known as Ternary number system.
Because ReRAM uses different electrical resistance to store information, it could be possible to store the data in an even higher number of states, hence speeding up computing tasks beyond current limitations.
Asst Prof Chattopadhyay who is from NTU’s School of Computer Science and Engineering, said in current computer systems, all information has to be translated into a string of zeros and ones before it can be processed.
“This is like having a long conversation with someone through a tiny translator, which is a time-consuming and effort-intensive process,” he explained. “We are now able to increase the capacity of the translator, so it can process data more efficiently.”
The quest for faster processing is one of the most pressing needs for industries worldwide, as computer software is getting increasingly complex while data centres have to deal with more information than ever.
The researchers said that using ReRAM for computing will be more cost-effective than other computing technologies on the horizon, since ReRAMs will be available in the market soon.
Prof Waser said, “ReRAM is a versatile non-volatile memory concept. These devices are energy-efficient, fast, and they can be scaled to very small dimensions. Using them not only for data storage but also for computation could open a completely new route towards an effective use of energy in the information technology.”
The excellent properties of ReRAM like its long-term storage capacity, low energy usage and ability to be produced at the nanoscale level have drawn many semiconductor companies to invest in researching this promising technology.
The research team is now looking to engage industry partners to leverage this important advance of ReRAM-based ternary computing.
Moving forward, the researchers will also work on developing the ReRAM to process more than its current four states, which will lead to great improvements of computing speeds as well as to test its performance in actual computing scenarios.
About Nanyang Technological University
A research-intensive public university, Nanyang Technological University, Singapore (NTU Singapore) has 33,500 undergraduate and postgraduate students in the colleges of Engineering, Business, Science, Humanities, Arts, & Social Sciences, and its Interdisciplinary Graduate School. It also has a medical school, the Lee Kong Chian School of Medicine, set up jointly with Imperial College London.
NTU is also home to world-class autonomous institutes – the National Institute of Education, S Rajaratnam School of International Studies, Earth Observatory of Singapore, and Singapore Centre for Environmental Life Sciences Engineering – and various leading research centres such as the Nanyang Environment & Water Research Institute (NEWRI), Energy Research Institute @ NTU (ERI@N) and the Institute on Asian Consumer Insight (ACI).
Ranked 13th in the world, NTU has also been ranked the world’s top young university for the last three years running. The University’s main campus has been named one of the Top 15 Most Beautiful in the World. NTU also has a campus in Novena, Singapore’s medical district.
Suggested Items
D Coupon Testing and Data Insights With GreenSource Fabrication
04/17/2024 | Marcy LaRont, PCB007 MagazineMarcy LaRont spoke with Steve Karas of GreenSource Fabrication at the SMTA UHDI conference in March. He presented a case study that GreenSource undertook with a customer on critical via reliability with advanced materials and used the experience to highlight the importance and effectiveness of D coupon testing. He also discussed GreenSource’s approach to data aggregation and a new system they developed to use collected data effectively.
Real Time with... IPC APEX EXPO 2024: Innovations in Thermal, Warpage, and Strain Metrology
04/17/2024 | Real Time with...IPC APEX EXPOEditor Nolan Johnson talks with Neil Hubble, president of Akrometrix, about the company's leadership in thermal, warpage, and strain metrology. Neil details how Akrometrix is committed to addressing customer challenges through technological evolution, innovative solutions, and a focus on data processing. A tabletop unit for thermal warpage testing is showcased at IPC APEX EXPO this year.
Signal Integrity Expert Donald Telian to Teach 'Signal Integrity, In Practice' Masterclass Globally
04/17/2024 | PRLOGDonald Telian and The EEcosystem announce the global tour of "Signal Integrity, In Practice," a groundbreaking LIVE masterclass designed to equip hardware engineers with essential skills for solving Signal Integrity (SI) challenges in today's fast-paced technological landscape.
SMT Prospects and Perspectives: AI Opportunities, Challenges, and Possibilities, Part 1
04/17/2024 | Dr. Jennie Hwang -- Column: SMT Perspectives and ProspectsIn this installment of my artificial intelligence (AI) series, I will touch on the key foundational technologies that propel and drive the development and deployment of AI, with special consideration of electronics packaging and assembly.
Argonne, RIKEN Sign a Memorandum of Understanding in Support of AI for Science
04/16/2024 | BUSINESS WIRELeaders in high performance computing in the U.S. and Japan have signed a memorandum of understanding (MOU) establishing a cooperative relationship in support of artificial intelligence (AI) computing projects.