Kelly Dack and Mike Creeden: Are We in a PCB Design Renaissance?


Reading time ( words)

During IPC APEX EXPO, Technical Editor Kelly Dack and San Diego PCB founder Mike Creeden discuss some of the trends they're seeing in the PCB design community, including a slight increase in young people becoming designers and more EEs doing design work. They also focus on the Designers Council's training and designer certification efforts, and the need for designers to get out of the office and visit a board shop once in a while. 

To watch this interview, click here.

Share


Suggested Items

PCB Cooling Strategies, Part 1

01/17/2018 | Bin Zhou, EDADOC
With the development of communication and IT industries and the ever-increasing demand for information analysis, many chip makers have racked their brains trying to provide customers with better technology, such as increased computing power and storage capacity of chips as well as diversifying their product offerings.

Streamlining Thermal Design of PCBs

01/10/2018 | Dr. John Parry, CEng, Mentor
When designing a PCB, thermal issues are often locked in at the point of selecting and laying out the chip package for the board. After that, only remedial actions are possible if the components are running too hot. Assumptions made about the uniformity of the airflow in these early design stages can mean a disaster for the commercial viability of a PCB if those assumptions are incorrect. A different approach is needed to improve reliability and to optimize board performance. Dr. John Parry of Mentor explains.

Mike Jouppi Discusses his Drive for Better Thermal Data

01/12/2018 | Andy Shaughnessy, PCB Design007
If you mention thermal management in a group of PCB designers and design engineers, Mike Jouppi’s name usually pops up. Mike is an engineer and founder of the Thermal Management LLC consulting firm. He spent years updating IPC’s charts on current-carrying capacity, which had been unchanged since the 1950s. I recently caught up with Mike and asked him to give us his views on the state of thermal management, as well as the tools and standards related to thermal design.



Copyright © 2018 I-Connect007. All rights reserved.