Smart Buildings Project Develops Open IoT Interfaces for the Needs of Building Services
February 23, 2017 | Aalto UniversityEstimated reading time: 2 minutes
Improving openness will result in interactive systems that make it possible to share data in a seamless manner. Compatibility also makes systems more cost-effective.
The technical systems used in buildings, including lighting, cooling and safety systems, have traditionally been closed solutions. These systems have usually been based on the information systems of hardware suppliers.
"Integration projects covering several different systems have mainly been separate, tailor-made solutions. This has made them expensive to implement," says Professor of Practice Heikki Ihasalo (Smart buildings and services) who is in charge of the project.
Integrated IoT solutions make life easier
One of the goals of the project is to make sharing data between different systems a smooth process. Currently, the extensive use of data is complicated because the descriptions of data acquired from different systems are not consistent and data from different systems always has to be linked separately.
"If we want to be able to collect data from different systems and share it between the systems in an effective and non-expensive way, we need shared interfaces and methods for describing the meaning of data," Ihasalo emphasises.
Buildings will increasingly be equipped with devices connected to the Internet of Things and the number of new systems will grow. Openness is needed between systems in order for the daily needs of consumers and businesses in the building trade to be met.
"The openness of systems has improved recently: for instance the communication between sensors and devices has taken a step forward. However, openness in system-level integration is still in its infancy."
Shared interfaces and description methods not only enable the management of data related to the built environment, but also make it possible to create solutions and services that can be used to improve the functionality, indoor air quality and energy efficiency of buildings. To the users of buildings, this means smooth services and an environment that supports health and wellbeing. At an office, this could mean accessing information about vacant conference rooms or the length of the queue at the cafeteria as well as being able to adjust the temperature and lighting at your desk with extreme ease.
The project is part of the KIRA-digi programme, a Government key project which aims to speed up the digitalisation of the built environment and construction. The participants of the project include the Smart buildings and services research group from the Aalto University School of Electrical Engineering, Granlund Oy, the City of Helsinki, Helvar Oy, Senate Properties and Tieto Corporation. The project will end in the autumn of 2017.
Suggested Items
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
04/19/2024 | Marcy LaRont, PCB007 MagazineFor my must-read picks of the week, I’m highlighting Parker Capers, a young professional seeking employment, solid counsel from Dan Beaulieu on what your post-show plan should look like, more information and insight on “chiplets” and the need for secure data transfer standards from columnist Preeya Kuray, as well as Matt Stevenson’s design for reality wisdom. It’s a reminder to download one of our newest books (there are several) you don't want to miss if you are an assembler.
D Coupon Testing and Data Insights With GreenSource Fabrication
04/17/2024 | Marcy LaRont, PCB007 MagazineMarcy LaRont spoke with Steve Karas of GreenSource Fabrication at the SMTA UHDI conference in March. He presented a case study that GreenSource undertook with a customer on critical via reliability with advanced materials and used the experience to highlight the importance and effectiveness of D coupon testing. He also discussed GreenSource’s approach to data aggregation and a new system they developed to use collected data effectively.
Real Time with... IPC APEX EXPO 2024: Innovations in Thermal, Warpage, and Strain Metrology
04/17/2024 | Real Time with...IPC APEX EXPOEditor Nolan Johnson talks with Neil Hubble, president of Akrometrix, about the company's leadership in thermal, warpage, and strain metrology. Neil details how Akrometrix is committed to addressing customer challenges through technological evolution, innovative solutions, and a focus on data processing. A tabletop unit for thermal warpage testing is showcased at IPC APEX EXPO this year.
Signal Integrity Expert Donald Telian to Teach 'Signal Integrity, In Practice' Masterclass Globally
04/17/2024 | PRLOGDonald Telian and The EEcosystem announce the global tour of "Signal Integrity, In Practice," a groundbreaking LIVE masterclass designed to equip hardware engineers with essential skills for solving Signal Integrity (SI) challenges in today's fast-paced technological landscape.
SMT Prospects and Perspectives: AI Opportunities, Challenges, and Possibilities, Part 1
04/17/2024 | Dr. Jennie Hwang -- Column: SMT Perspectives and ProspectsIn this installment of my artificial intelligence (AI) series, I will touch on the key foundational technologies that propel and drive the development and deployment of AI, with special consideration of electronics packaging and assembly.