SMTA China Presents Awards at SMTA China East Conference/NEPCON China 2017


Reading time ( words)

SMTA China announces that it presented awards for seven papers and two exhibits at the SMTA China East Conference 2017 Award Presentation Ceremony, held on Tuesday, April 25, 2017 at the Shanghai World Expo Exhibition & Convention Center in conjunction with the SMTA China Annual Award Ceremony.

SMTA_Award1.jpg

Best Paper / Best Presentation Awards presented by SMTA China during the SMTA China East Conference 2017

SMTA_Award2.jpg

Best Emerging Exhibit / Best Exhibit Technology Awards presented by SMTA China during the SMTA China East Conference 2017 

Flex’s Henley Zhou was awarded The Best Paper of Technology Conference One for the paper titled “The Study of the Effect of PTH Diameter, Connection Type and Amount of Connected Copper On PTH Hole Fill Percentage By Wave Soldering.” 

KYZEN’s Daniel Gao was awarded The Best Paper of Technology Conference Two for the paper titled “Cleaning Agent Innovation for Highly Dense Electronic Assemblies.” 

Keith Bryant, from SMT Solutions, and Michael Tang, from YXLON International GmbH,  received the award for The Best Presentation of Technology Conference One for the presentation titled “Computer Tomography from Microelectronics to Assembled Products.” 

Dr. Wayne Koh, from Pacrim Technology Inc., received the award for The Best Presentation of Technology Conference Two for the presentation titled “Progress in Low Temperature Lead-Free Solder for SMT Assembly.” 

Ji Xu, from ASM Assembly Systems Ltd., received the award for The Best Presentation of Vendor Conference One for the presentation titled “Smart #1 SMT Factory - Our Smart Move to Industry 4.0.” 

Derek Wang, from AIM Solder (Shenzhen) Company Limited, received the award for The Best Presentation of Vendor Conference Two for the presentation titled “The Impact of Reduced Solder Alloy Powder Size on Solder Paste Print Performance.”

Yu Xiang, from Shenzhen City TongFang Electronic New-material Co., Ltd., received the award for The Best Presentation of Vendor Conference Three for the presentation titled “QFN Solder Void Solution Study.” 

Dongguan Anda Automation Equipment Co., Ltd. received the award for The Best Emerging Exhibit of the Year 2017 China East with the product of “Dispenser Machine” and Model of “AD-16”. 

Cencorp Automation Oy received the award for The Best Exhibit Technology of the Year 2017 China East with the product of “In-Line Router” and Model of “1000BR”.

Share


Suggested Items

Manufacturability: Pad Relief and Mask Relationship to Solder Joint Volume

03/09/2018 | Ken Horky, Peterson Manufacturing
Electronic assembly thermal management has always been an issue but has become more significant as we pack more power and function into a smaller form factor. In recent years, the growing use of LEDs for illumination on a large scale has presented additional thermal demands.

PCB Pad Repair Techniques

01/08/2018 | Bob Wettermann, BEST Inc.
There are a variety of reasons behind pads getting "lifted" completely or partially from the laminate of a PCB. Per the just revised IPC-A-610 Revision G, a defect for all three classes occurs when the land is lifted up one or more pad thicknesses. Lifted pads can occur when a device has been improperly removed or there is a manufacturing defect in the board construction. In any case, as with any repair, the ultimate decision on the ability to repair the pad lies with the customer.

Focus on the New

01/05/2018 | Stephen Las Marias, I-Connect007
It seems like it wasn't too long ago when I was writing about the optimism of the electronics manufacturing and assembly industry going into 2017. Now, here we are again at the beginning of the new year, looking at new trends, disruptive technologies, and emerging markets for 2018. I am also proud to announce our new branding as well as our fresh, new look.



Copyright © 2018 I-Connect007. All rights reserved.