Rogers to Exhibit High Performance Circuit Materials at IMS 2017

Reading time ( words)

Rogers Corporation will be highlighting its wide range of circuit materials at the 2017 IEEE International Microwave Symposium (IMS), the RF/microwave industry’s largest annual international gathering of RF/microwave engineering professionals.

IMS is June 6-8, 2017 in Honolulu, Hawaii and the theme is “riding the wave” of the coming 5G wireless communications revolution. The event combines technical engineering sessions with a large exhibition area which includes representatives from leading RF/microwave industry companies. It is expected to feature more than 400 exhibition booths and attract more than 8000 attendees.

Rogers Corp. will show examples of its extensive range of circuit materials at Booth 1548, and offer guidance to visitors on the optimum use of those materials for circuits ranging from high speed and high-frequency (HF) bands through millimeter-wave frequencies.

Visitors to the Rogers’ booth will learn about a diversified group of circuit materials, including Kappa 438 laminates, RO1200 laminates, RO4730G3 laminates, and 92ML laminates and prepregs.

Kappa 438 Laminates

Kappa 438 laminates feature the performance of mid-tier circuit materials that exceed performance limitations of FR-4 and provide the optimum blend of price, performance and durability. Kappa 438 laminates have low loss, excellent dielectric constant (Dk) tolerance and tight thickness control, and are engineered for outstanding, repeatable wireless performance. Kappa 438 laminates have a low Z axis CTE and High Tg for improved design flexibility, PTH reliability and automated assembly compatibility. They can be fabricated using standard epoxy/glass (FR-4) processes. These laminates are compatible with conventional bondplies and lead free solder processes, and have the UL 94 V-0 flame retardant rating. A design Dk of 4.38 tailored to FR-4 industry standard norms facilitates ease of converting existing FR-4 designs where better electrical performance is needed.

RO1200 Laminates

Network equipment designers need high performance circuit materials with superior electrical properties for applications like IP infrastructure, High Performance Computing and Test and Measurement. RO1200 circuit materials are engineered to meet the unique electrical and thermal/mechanical demands of high speed designs. Rogers RO1200 circuit materials enable system designers the flexibility to design leading edge systems that maximize data throughput and minimize latency in performance demanding applications. 

With a low dielectric constant of 3.05, and a maximum dissipation factor of 0.0017 @10 GHz, RO1200 laminates provide outstanding signal integrity, reduced signal skew, and reduced cross-talk. Combined with superior thermal/mechanical performance, low CTE, and a halogen free UL 94 V-0 rating, RO1200 laminates are well suited for the most demanding high layer count applications.

RO4730G3 Laminates

RO4730G3 UL 94 V-0 antenna grade ceramic hydrocarbon laminates combine a flame retardant, low loss thermoset dielectric with patented LoPro® copper foil, and incorporate a proprietary filler system that brings to market solutions for current macro base station antenna designs on traditional and active antenna arrays, and PCB antennas solutions for those about to come, such as 5G infrastructure.

RO4730G3 laminates have a Dk match to 3.0, Df of 0.0023 (measured at 2.5 GHz), low z-axis CTE of 30.3 ppm/°C from -55 to +288°C for plated through hole reliability, low density microspheres yielding a laminate 30% lighter than PTFE products, excellent passive-intermodulation (PIM) performance, and are compatible with conventional epoxy and high temperature lead-free solder processing. With the right combination of materials, RO4730G3 laminates offer practical, cost effective circuit material solutions.

92ML Materials

92ML materials are halogen-free, flame retardant, thermally conductive epoxy based prepreg and laminate systems. These thermally enhanced laminates and prepregs are specifically engineered and manufactured to meet the demands of high power applications. They provide a low-cost, lead-free solder compatible system with enhanced heat transfer characteristics. These materials are ideal for multilayer applications requiring thermal management throughout the entire board. The 92ML laminate materials are available with up to 4oz copper cladding; thick enough to meet today’s most demanding power distribution requirements. The high thermal conductivity of up to 3.5 W/mK (in-plane) in combination with the relative ease and familiarity of epoxy based systems makes this material an ideal candidate for applications such as motor controllers, power supplies, converters, automotive electronics, etc. The relatively high Tg value of 160°C in combination with a low Z-axis coefficient of thermal expansion of 22ppm/°C (Tg) ensure that the 92ML materials survive lead free solder exposures and board reliability testing. The excellent rheological characteristics of the 92ML prepregs enable a high degree of resin flow; a critical element of high power multilayer board processing.


Technical Marketing Manager John Coonrod will be presenting “The Impact of Final Plated Finishes on High Frequency Performance of PCBs at 1 PM on June 6 in the MicroApps Theatre on the exhibition floor at Booth 1946.

About Rogers Corporation

Rogers Corporation is a global technology leader in engineered materials to power, protect, and connect our world.  With more than 180 years of materials science experience, Rogers delivers high-performance solutions that enable clean energy, Internet connectivity, advanced transportation and other technologies where reliability is critical. Rogers delivers Power Electronics Solutions for energy-efficient motor drives, vehicle electrification, and alternative energy; Elastomeric Material Solutions for sealing, vibration management, and impact protection in mobile devices, transportation interiors, and performance apparel; and Advanced Connectivity Solutions for wireless infrastructure, automotive safety and radar systems. Headquartered in Connecticut (USA), Rogers operates manufacturing facilities in the United States, China, Germany, Belgium, Hungary, and South Korea, with joint ventures and sales offices worldwide. For more information, visit


Suggested Items

The Institute of Circuit Technology Annual Symposium 2018

06/18/2018 | Pete Starkey, I-Connect007
ICT technical director Bill Wilkie is well-known for choosing notable venues for Institute of Circuit Technology events, and his choice for this year’s Annual Symposium was the National Motor Museum, located in the village of Beaulieu in the heart of the New Forest, a national park in the county of Hampshire in Southern England. The region is known for its heathland, forest trails and native ponies.

Experts Discussion with John Talbot, Tramonto Circuits

06/06/2018 | I-Connect007 Editorial Team
For this first issue of Flex007 Magazine, we interviewed John Talbot, president and owner of Tramonto Circuits. Headquartered in metro Minneapolis, Minnesota, Tramonto manufactures flexible and rigid PCBs for a variety of industry segments. Editors Andy Shaughnessy, Patty Goldman and Stephen Las Marias asked John to discuss the challenges and opportunities in the world of flexible circuits, and some of the trends he’s seeing in this market.

Elga Europe Reality and Ultra-High-Resolution Photoresist

04/24/2018 | Patty Goldman, I-Connect007
While walking around the PCB hall at productronica, I was approached by my good friend Gene Weiner. Gene emphatically directed me to the Elga booth to find out about their new extra-thick dry film that can image extremely fine features with a perfectly perpendicular sidewall. Elga Europe CEO Giorgio Favini filled me in on the details.

Copyright © 2018 I-Connect007. All rights reserved.