A Green Idea


Reading time ( words)

As students design, prototype, and build remote-controlled robots in the Harvard John A. Paulson School of Engineering and Applied Sciences course Computer-Aided Machine Design (ES 51), discarded 3D-printed parts start to pile up.

Course assistant Robert Anderson, S.B. ’19, a mechanical engineering concentrator, was not content to toss the scraps in the recycling bin, so he turned this plastic waste into a teachable moment for his peers.

Anderson was awarded a $4,000 Sustainability Grant from the Harvard Office for Sustainability to purchase several pieces of equipment that enable on-site recycling of 3D printing filament. The equipment, pioneered by Filabot, a Vermont startup, grinds a 3D-printed item and then extrudes recycled filament with the robustness and mechanical properties required for reuse in a 3D printer.

He learned about the company from his younger sister, who had conducted research about the material properties of the recycling process. The Filabot equipment seemed like the perfect solution to those piles of discarded plastic.

“In many hands-on SEAS courses, we go through a ton of 3D-printed material. A prototype gets held or played with for a few minutes or hours and is then discarded,” he said. “I saw that there was a huge benefit to being able to recycle this material on site.”

After purchasing the equipment, Anderson and staff members in the Active Learning Labs collaborated to work the bugs out of the novel recycling system. This technology is still in its infancy, Anderson explained, and it not yet very user-friendly.

Anderson applied his problem-solving skills to streamline manual system settings, such as extrusion speed and temperature, so students can recycle filament efficiently.

“I learned a lot about how to design a process, rather than an invention, and make all the pieces work together. To develop a human process rather than a robot or a piece of technology is a different type of design, and something different than the work I’ve done in my classes,” he said.

In the future, he hopes to be awarded another grant to buy additional components that will help the system function more efficiently. He would also like to see an engineering student incorporate the technology into a senior thesis project. For example, there is great potential to develop an algorithm that could automatically optimize the settings based on the desired diameter of the recycled filament, Anderson said.

At the recent University Sustainability Fair, Anderson displayed the Filabot to highlight the importance of 3D printer filament recycling. Beyond recycling a few pounds of plastic, Anderson hopes his project has an even greater impact across campus and beyond.

“Being sustainable and environmentally friendly is of importance for everyone, but especially for engineers who are developing new structures and inventions at the cutting edge of technology,” he said. “My hope is that the Harvard students who will go on from here and change the world will carry some of this knowledge with them.”

Source: Original article by Adam Zewe

Share


Suggested Items

DARPA’s Drive to Keep the Microelectronics Revolution at Full Speed Builds Its Own Momentum

08/28/2017 | DARPA
To perpetuate the pace of innovation and progress in microelectronics technology over the past half-century, it will take an enormous village rife with innovators. This week, about 100 of those innovators throughout the broader technology ecosystem, including participants from the military, commercial, and academic sectors, gathered at DARPA headquarters at the kickoff meeting for the Agency’s new CHIPS program, known in long form as the Common Heterogeneous Integration and Intellectual Property (IP) Reuse Strategies program.

Enabling Extreme New Designs for Optics and Imagers

08/22/2016 | DARPA
DARPA seeks engineered optical materials unconstrained by “laws” of classical optics to develop vastly smaller, lighter, and more capable devices for advanced imaging applications.

CDTEI Summer School 2016: Social Entrepreneurship Challenge in Partnership with RNIB

07/19/2016 | Connie Stovell, EPSRC Centre
Each year, we bring all of our CDT students together to participate in our annual summer school, which provides an opportunity for all the student cohorts to meet, work together and learn new skills.



Copyright © 2017 I-Connect007. All rights reserved.