Embedded Technology: It’s All Around Us
June 12, 2017 | Patty Goldman, I-Connect007Estimated reading time: 1 minute
In the early ‘80s, the PCB company I worked for was testing some of the first material for buried resistors. I can’t recall what customer it was for, or how far along the project got, but over the years it seemed like the technology was slow to be adopted and perhaps ahead of its time. Now, a lot of years later, embedded technology seems to be finally coming into its own—thanks to Moore’s Law and the ever-pressing need for more real estate on the circuit board surface. No longer just for the odd, expensive military product, buried components can be found in that most ubiquitous of consumer products, the smartphone, as you will learn in this issue. Who knew!
Back then, there were only buried resistors and from what I understand, the material was not cheap. Most uses involved either a need for extraordinary reliability or there was enough savings in reduced layers or improved abilities that would justify the cost. But there are other types of passives as well as buried active components. And the justifications are more complicated: signal integrity, greatly improved imaging capability which means more accurate resistive values, and always space, as in the required surface area of a circuit board.
We thought we would find out from our readers just how “popular” this technology really was. After all, as circuits get denser and lines/ spaces get smaller, it stands to reason that burying components would be an increasing requirement and they would be part of every complicated multilayer. From our recent survey, we learned that more than half the respondents saw very little embedded technology work and about 5% worked with it a great deal (
To read the full version of this article which appeared in the June 2017 issue of The PCB Magazine, click here.
Suggested Items
KIC’s Miles Moreau to Present Profiling Basics and Best Practices at SMTA Wisconsin Chapter PCBA Profile Workshop
01/25/2024 | KICKIC, a renowned pioneer in thermal process and temperature measurement solutions for electronics manufacturing, announces that Miles Moreau, General Manager, will be a featured speaker at the SMTA Wisconsin Chapter In-Person PCBA Profile Workshop.
The Drive Toward UHDI and Substrates
09/20/2023 | I-Connect007 Editorial TeamPanasonic’s Darren Hitchcock spoke with the I-Connect007 Editorial Team on the complexities of moving toward ultra HDI manufacturing. As we learn in this conversation, the number of shifting constraints relative to traditional PCB fabrication is quite large and can sometimes conflict with each other.
Standard Of Excellence: The Products of the Future
09/19/2023 | Anaya Vardya -- Column: Standard of ExcellenceIn my last column, I discussed cutting-edge innovations in printed circuit board technology, focusing on innovative trends in ultra HDI, embedded passives and components, green PCBs, and advanced substrate materials. This month, I’m following up with the products these new PCB technologies are destined for. Why do we need all these new technologies?
Experience ViTrox's State-of-the-Art Offerings at SMTA Guadalajara 2023 Presented by Sales Channel Partner—SMTo Engineering
09/18/2023 | ViTroxViTrox, which aims to be the world’s most trusted technology company, is excited to announce that our trusted Sales Channel Partner (SCP) in Mexico, SMTo Engineering, S.A. de C.V., will be participating in SMTA Guadalajara Expo & Tech Forum. They will be exhibiting in Booth #911 from the 25th to the 26th of October 2023, at the Expo Guadalajara in Jalisco, Mexico.
Intel Unveils Industry-Leading Glass Substrates to Meet Demand for More Powerful Compute
09/18/2023 | IntelIntel announced one of the industry’s first glass substrates for next-generation advanced packaging, planned for the latter part of this decade.