Indium's Jason Chou to Present at Microelectronics Tech Asia Singapore


Reading time ( words)

Indium Corporation's Jason Chou, Area Technical Manager for Taiwan, will share his technical expertise at Microelectronics Tech Asia Singapore, July 4–5, 2017 in Singapore.

Chou will present "Development of a Stable Flux to Address BGA Ball-Mount Challenges". This presentation outlines the wetting, movement during reflow (MDR), and secondary ion mass spectrometry (SIMS) tests used to develop a stable BGA ball-mount flux that can be used in a wide-range of industry applications.

Chou provides technical support to Indium Corporation’s customers in Taiwan, with a focus on the semiconductor industry. Chou earned his master’s degree in chemistry from National Tsing Hua University and his bachelor’s degree in chemistry from National Cheng Kung University. He has served as the group leader for the National Nano Device Laboratories, Tainan, Taiwan, where he collaborated with university professors and industry professionals on special projects for semiconductor manufacturing.

About Indium Corporation

Indium Corporation is a premier materials manufacturer and supplier to the global electronics, semiconductor, thin-film, and thermal management markets. Products include solders and fluxes; brazes; thermal interface materials; sputtering targets; indium, gallium, germanium, and tin metals and inorganic compounds; and NanoFoil. Founded in 1934, Indium has global technical support and factories located in China, Malaysia, Singapore, South Korea, the United Kingdom, and the USA.

For more information about Indium Corporation, visit www.indium.com.

Share


Suggested Items

What Matters Most is Communication

12/04/2017 | Stephen Las Marias, I-Connect007
While there may be new techniques and strategies, technologies, equipment, tools, and materials to employ and utilize, there is always one thing that will ensure the manufacturing/ assembly success of your product: communication. Communication between the designer and the assembler will help improve the manufacturability and assembly of the final product—even before the board design gets fabricated.

DFx on High-Density Assemblies

12/01/2017 | Jonas Sjoberg, Chris Nash, David Sbiroli, and Wisdom Qu, Indium Corporation
Use of new technologies poses a number of challenges for solder paste selection, PCB design, assembly process, and reliability. The type of end product will have different challenges, concerns, and requirements in all aspects. The assembly line for many of these end products will look very similar, but specification limits would be different.

Creating the Perfect Solder Joint

11/03/2017 | Stephen Las Marias, I-Connect007
From a visual standpoint, a good solder joint should be smooth, bright, shiny, clean, and have a nice concave solder fillet. But how do you ensure that inside those joints, good intermetallic bonds are formed? Solder joints play several different roles, and they represent several different opportunities to be a problem, a partial improvement, or a complete improvement. Since all solder joints aren’t created equal, the first step is to understand what is expected or required of that joint.



Copyright © 2017 I-Connect007. All rights reserved.