A Brief Tutorial on Embedded Capacitors
June 26, 2017 | Jesse Ward, COMPUNETICS, INC.Estimated reading time: Less than a minute
Introduction
Compunetics has been operating in the embedded components market for more than 20 years. Initially driven by their parent company’s need for high layer-count, high-density embedded capacitance cards for their OEM product offerings, technology and processes were developed which are mature and reliable. Embedded technology is integrated into PCBs using conventional processing techniques; the capacitive layers are drop-in replacements in the existing PCB stack. However, special processing is required to properly transport the extremely thin cores associated with embedded capacitance layers (three to 25 microns thick).
Embedded capacitors rely on utilization of planar copper-clad, thin-core laminate (Figure 1). These laminates replace decoupling capacitors which are normally mounted next to an IC. The IC is routed directly to the capacitive layer using vias. The laminates are drop-in replacements that use the existing PCB stack-up. Various dielectrics and core thicknesses are available. For example, DuPont HK04 material utilizes a 1-mil copper-clad polyimide core which functions as an ideal capacitor (Figure 2).
To read the full version of this article which appeared in the June 2017 issue of The PCB Magazine.
Suggested Items
Insulectro’s 'Storekeepers' Extend Their Welcome to Technology Village at IPC APEX EXPO
04/03/2024 | InsulectroInsulectro, the largest distributor of materials for use in the manufacture of PCBs and printed electronics, welcomes attendees to its TECHNOLOGY VILLAGE during this year’s IPC APEX EXPO at the Anaheim Convention Center, April 9-11, 2024.
ENNOVI Introduces a New Flexible Circuit Production Process for Low Voltage Connectivity in EV Battery Cell Contacting Systems
04/03/2024 | PRNewswireENNOVI, a mobility electrification solutions partner, introduces a more advanced and sustainable way of producing flexible circuits for low voltage signals in electric vehicle (EV) battery cell contacting systems.
Heavy Copper PCBs: Bridging the Gap Between Design and Fabrication, Part 1
04/01/2024 | Yash Sutariya, Saturn Electronics ServicesThey call me Sparky. This is due to my talent for getting shocked by a variety of voltages and because I cannot seem to keep my hands out of power control cabinets. While I do not have the time to throw the knife switch to the off position, that doesn’t stop me from sticking screwdrivers into the fuse boxes. In all honesty, I’m lucky to be alive. Fortunately, I also have a talent for building high-voltage heavy copper circuit boards. Since this is where I spend most of my time, I can guide you through some potential design for manufacturability (DFM) hazards you may encounter with heavy copper design.
Trouble in Your Tank: Supporting IC Substrates and Advanced Packaging, Part 5
03/19/2024 | Michael Carano -- Column: Trouble in Your TankDirect metallization systems based on conductive graphite or carbon dispersion are quickly gaining acceptance worldwide. Indeed, the environmental and productivity gains one can achieve with these processes are outstanding. In today’s highly competitive and litigious environment, direct metallization reduces costs associated with compliance, waste treatment, and legal issues related to chemical exposure. What makes these processes leaders in the direct metallization space?
AT&S Shines with Purest Copper on World Recycling Day
03/18/2024 | AT&SThe Styrian microelectronics specialist AT&S is taking World Recycling Day as an opportunity to review the progress that has been made in recent months at its sites around the world in terms of the efficient use of resources: