TopLine Intros Large Scale QFN Daisy Chain Test Package


Reading time ( words)

TopLine now produces very large size 12x12mm daisy chain QFN components with dummy silicon die for use in a variety of SMT process and thermal profile testing applications. These large-size, bottom terminal QFN packages feature 100 pins, spaced very fine pitch at 0.4mm. The package size conforms to JEDEC standards with package height not exceeding 1.0mm. The terminals and ground pads are plated with nickel palladium gold (Ni Pd Au) to optimize SMT soldering.

The package level daisy chain circuit, made with 25µm gold bonding wire, forms an electrical connection between pads. These zero-ohm connections may be used to monitor electrical opens and shorts so that one may forensically determine the cause of PCB circuit board failure with simple GO/No-Go techniques using an ohm meter. Operating temperature range from -65⁰C to +150⁰C. 

Other applications include PCB circuit board cleanliness testing incorporating SIR (surface insulation resistance) monitoring.

About TopLine

TopLine manufactures a wide range of daisy chain semiconductor packages for process development, experimentation, machine evaluation, solder training, and SMT assembly practice. TopLine products provide hands-on learning for engineers. TopLine is a one-stop source for all dummy components. For more information, visit http://www.topline.tv/.

Share


Suggested Items

The Vital Role of Solder Paste Printing in New Product Introduction

02/22/2018 | Richard Barratt, JJS Manufacturing
The high degree of automation within the SMT methodology offers a variety of advantages, from automatic correction of errors, to simpler and faster assembly, better mechanical performance, increased production rates and reduced labor costs. In this first in a series of articles exploring SMT assembly, we highlight the specific attributes, and the vital importance, of the solder paste printing process for your NPI.

Working with Customers: A Consultant's Perspective

02/19/2018 | Stephen Las Marias, I-Connect007
Industry veteran and expert Chrys Shea is in a unique position when it comes to her work for the electronics assembly industry. As president of consulting firm Shea Engineering Services, she helps suppliers test and bring new products to the market, and helps assemblers bring new processes or skills to their assembly lines.

Designing Electronics for Harsh Conditions

02/12/2018 | Patty Rasmussen, East West Manufacturing
We expect a lot from our products, especially our electronic products. Think about it: cellphones, wearables, medical devices—for some reason we think they should still work after being immersed in liquid, left outdoors in freezing temperatures or dropped on concrete from a standing position.



Copyright © 2018 I-Connect007. All rights reserved.