Phil Zarrow to Talk on ‘Deadly Sins’ of SMT at SMTA Capital Expo and Tech Forum


Reading time ( words)

The SMTA Capital Chapter has announced that Phil Zarrow of ITM Consulting will present "The 'Deadly Sins' of SMT Assembly" at the upcoming Capital Expo and Tech Forum at Johns Hopkins University/Applied Physics Lab, Kossiakoff Center, on Thursday, August 24.

Everyone has heard of the “7 Deadly Sins” that will, supposedly, lead one to Hell. There are also the “Deadly Sins” of SMT—there are more than just seven—and they can make your assembly process a “hell on earth.”

During the course of ITM's assembly process audits and troubleshooting work, they tend to see trends in the types of errors and problems. In other words, a lot of people are making the same mistakes. The resulting process problems wreak havoc with an impact on assembly yields ranging from 5% to 20%. In addition to this direct cost, there is also additional financial impact with regard to time spent reworking and repairing, the on corrective action by QC, engineering and management, and, of course, "do-over."

This presentation identifies the “deadly sins” of SMT assembly, both for Pb-free and “leaded” processes. Besides the symptoms and consequences of each type of error, root-cause, rectification and prevention techniques will be presented. Best practices will be discussed for each of the key process steps. The workshop will provide the participant with an understanding of how to identify and correct the most common SMT assembly problems. It will include identification of vendor and source problems including components and materials as well as design related problems.

The SMTA Capital Expo and Tech Forum will be held at Johns Hopkins University / Applied Physics Lab, Kossiakoff Center, 11100 Johns Hopkins Road, Laurel, MD 20723. Registration opens at 8:00 AM and includes a complimentary lunch on the show floor. Exhibits are open from 9:00 am until 3:00 pm and the first technical presentation will start at 9:30 am.

About Surface Mount Technology Association (SMTA)

The SMTA membership is an international network of professionals who build skills, share practical experience and develop solutions in electronic assembly technologies, including microsystems, emerging technologies, and related business operations. For more information or to join, please visit www.smta.org.

Share


Suggested Items

Tempo Automation: Setting the Pace for Low-Volume, Quick-Turn Assembly

01/31/2018 | Patty Goldman, I-Connect007
Jesse Koenig, co-founder and VP of technology at PCB assembly company Tempo Automation, discusses with I-Connect007's Patty Goldman how they are making electronics development much easier and more seamless for customers.

Top 10 Most-Read SMT Articles of 2017

12/29/2017 | I-Connect007
Every year, we like to take a look back at the most popular SMT news and articles. These are the top 10 most-read SMT articles from the past year.

Industry 4.0 and the Platform-Based Approach to Testing

12/19/2017 | Stephen Las Marias, I-Connect007
Chandran Nair, the vice president for Asia Pacific at National Instruments, explains how the Industry 4.0 vision will change electronics manufacturing. He discusses key technology enablers that would drive the evolution of manufacturing processes, and how a platform-based approach can help improve test and measurement.



Copyright © 2018 I-Connect007. All rights reserved.