NASA Tests Autopilot Sensors During Simulations
August 8, 2017 | NASAEstimated reading time: 3 minutes
Inside a large, black-walled facility outside Denver, NASA’s Satellite Servicing Projects Division (SSPD) team successfully completed the latest testing of three rendezvous and proximity operations sensors used for satellite servicing applicatons and beyond. These sensors are needed for autonomous rendezvous of spacecraft, which is a vital technology for robotically servicing a satellite.
Held at Lockheed Martin’s Space Operations Simulation Center (SOSC), this round of testing involved a Vision Navigation System (VNS) light detection and ranging (Lidar) sensor, the Goddard Reconfigurable Solid-state Scanning Lidar (GRSSLi) sensor, and the wide field-of-view visible camera. These three instruments were tested side-by-side in different situations to assess their accuracy and sensitivity for eventual use in satellite servicing. The sensors all contribute to helping a servicer “see” and approach a client.
“These sensors are the key to tackling the most difficult part of satellite servicing, the autonomous rendezvous. Our team was very pleased with the performance of these imagers in a space-like environment,” said Bob Smith, satellite servicing project manager.
To autonomously rendezvous, two spacecraft must connect without any human control or input. A combination of sensors, algorithms and a computer are essential to generate the precise maneuvers needed for this challenging operation.
During testing at SOSC, engineers simulated multiple scenarios. To start, the three-instrument suite was set to a fixed position and viewed calibrated targets at known distances to calibrate their instrument’s light and distance sensitivity. Next, engineers used a model of a satellite affixed to a moving robot, and instruments mounted on another robot to “fly” toward the satellite to record data during this simulated, controlled rendezvous. In addition to gathering light and distance measurements using VNS and GRSSLi, this test also allowed operators to test algorithms that determine the position and orientation or “pose” of a satellite while conducting a simulated rendezvous.
SSPD aims to demonstrate and mature technologies that are critical to satellite servicing, including the instruments derived from these tested sensors. The instruments will feed vital data to a cutting-edge SpaceCube computer, which will process the data for autonomous tracking, approach and grasping of a client accordingly.
The testing conducted at the SOSC confirmed improved performance for light intensity and range measurements by the imagers. The results also indicate that the VNS is progressing on schedule per the SSPD timeline.
In addition to satellite servicing testing, there were also two teams from NASA’s Johnson Space Center in Houston that tested the VNS for applications specific to human exploration missions. One team gathered data for possible applications of autonomous rendezvous for visiting vehicles to the International Space Station. The second group collected data that could be incorporated into the design of Orion, NASA’s new exploration spacecraft, designed to carry astronauts to destinations in deep space, including Mars. Both groups conducted long range testing and simulated rendezvous to a docking port mockup.
In a technology demonstration related to this SOSC testing, SSPD is also currently executing the Raven mission on the International Space Station, which is helping NASA develop autopilot for spacecraft. While testing at SOSC helps engineers develop algorithms and verify sensor performance using calibrated distances between two objects, testing on the space station provides data on in-orbit functionality of sensors compared to ground testing, and is the best environment to test an infrared camera. Utilizing both ground-testing and flight-testing is part of the process of learning, perfecting, and solving difficult engineering challenges for space exploration.
The three instruments are now back from SOSC and at NASA’s Goddard Space Flight Center in Greenbelt, Maryland, where the SSPD team is reviewing data to streamline and maximize their performance.
“The data from this testing will help us build flight cameras and Lidar systems for making satellite servicing a reality,” said Benjamin Reed, SSPD deputy division director.
Suggested Items
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
04/19/2024 | Marcy LaRont, PCB007 MagazineFor my must-read picks of the week, I’m highlighting Parker Capers, a young professional seeking employment, solid counsel from Dan Beaulieu on what your post-show plan should look like, more information and insight on “chiplets” and the need for secure data transfer standards from columnist Preeya Kuray, as well as Matt Stevenson’s design for reality wisdom. It’s a reminder to download one of our newest books (there are several) you don't want to miss if you are an assembler.
D Coupon Testing and Data Insights With GreenSource Fabrication
04/17/2024 | Marcy LaRont, PCB007 MagazineMarcy LaRont spoke with Steve Karas of GreenSource Fabrication at the SMTA UHDI conference in March. He presented a case study that GreenSource undertook with a customer on critical via reliability with advanced materials and used the experience to highlight the importance and effectiveness of D coupon testing. He also discussed GreenSource’s approach to data aggregation and a new system they developed to use collected data effectively.
Real Time with... IPC APEX EXPO 2024: Innovations in Thermal, Warpage, and Strain Metrology
04/17/2024 | Real Time with...IPC APEX EXPOEditor Nolan Johnson talks with Neil Hubble, president of Akrometrix, about the company's leadership in thermal, warpage, and strain metrology. Neil details how Akrometrix is committed to addressing customer challenges through technological evolution, innovative solutions, and a focus on data processing. A tabletop unit for thermal warpage testing is showcased at IPC APEX EXPO this year.
Signal Integrity Expert Donald Telian to Teach 'Signal Integrity, In Practice' Masterclass Globally
04/17/2024 | PRLOGDonald Telian and The EEcosystem announce the global tour of "Signal Integrity, In Practice," a groundbreaking LIVE masterclass designed to equip hardware engineers with essential skills for solving Signal Integrity (SI) challenges in today's fast-paced technological landscape.
SMT Prospects and Perspectives: AI Opportunities, Challenges, and Possibilities, Part 1
04/17/2024 | Dr. Jennie Hwang -- Column: SMT Perspectives and ProspectsIn this installment of my artificial intelligence (AI) series, I will touch on the key foundational technologies that propel and drive the development and deployment of AI, with special consideration of electronics packaging and assembly.