Development of Breathable Electronic Skin using Nanofiber Substrate
August 22, 2017 | DGISTEstimated reading time: 2 minutes
DGIST’s research team developed the world’s first electronic skin using nanofiber substrates. Unlike electronic skin using conventional plastic and rubber substrates, the research team developed an electronic skin that is permeable to oxygen, perspiration, and other bodily fluids; it is expected to be useful for long-term health monitoring because it does not cause discomfort or inflammation to the body.
DGIST (President Sang-hyuk Son) announced on Wednesday July 19, 2017 that Professor Sungwon Lee’s research team from the Department of Emerging Materials Science has developed a breathable electronic skin using a nanofiber substrate through a joint research with Professor Takao Someya of the University of Tokyo, Japan.
Recently, wearable electronic devices have been developed, and research and related businesses in association with health monitoring devices using electronic skin have emerged around the world. However, most electronic skin-related technologies utilize materials such as plastic or rubber; thus, they can cause skin irritation or interfere with metabolism when attached to skin or biological tissue.
In particular, when they are attached to the skin for a long duration, they are impermeable to oxygen and can cause skin irritation such as itching and eczema or inconvenience caused by the sensation of having a foreign object attached to the skin. This has been considered as a limitation since it makes it difficult to precisely and chronologically analyze and treat the biometric information of users who exercise without constraint.
To overcome these shortcomings, Professor Sungwon Lee’s research team has fabricated a substrate using one-dimensional nanofibers rather than the conventional two-dimensional planar substrate and applied a technique to develop electronic skin devices thereon. As such, they have succeeded in collecting bio-signals such as body temperature and electromyogram (EMG) for the first time in the world.
The research team fabricated nanomesh conductors, nano-sized (300~700 nm) fiber substrates that are made by coating water-soluble high-molecular Polyvinyl Alcohol (PVA) alcohol with gold particles. On top of that, utilizing conventional electronic skin technology, they have developed an electronic skin that has a sensor that can measure touch, temperature pressure, and the like.
The nanofiber-based electronic skin developed by the research team has good elasticity while retaining its electrical properties; thus, it has excellent adhesion even when attached to joints such as fingers. Also, it has a structure that can circulate air and bodily fluids through nano-sized holes uniformly distributed throughout the substrate.
In addition, it is thinner and softer compared to existing electronic skin, and can be attached with water without using any separate adhesive. This way, users can directly attach the skin to the desired part of the body and measure electric signals and body temperature from their body. Clinical trials have also proven that the biocompatibility of this new skin is higher than that of conventional electronic skin materials.
Professor Sungwon Lee from the Department of Emerging Materials Science said, “After attaching the nanofiber-based electronic skin to the skin for one week, I have witnessed neither foreign body sensation nor skin irritation. I will carry out a follow-up study to develop an electronic skin platform suitable for long-term health monitoring in conjunction with a smart device.”
Suggested Items
IPC Bestows Posthumous Hall of Fame Award to Industry Icon Michael Ford
04/18/2024 | IPCIPC honored the late Michael Ford, Aegis Software, for his extraordinary contributions to the global electronics manufacturing industry with the IPC Raymond E. Pritchard Hall of Fame Award at IPC APEX EXPO 2024. IPC’s most prestigious honor, the Hall of Fame Award is given to individuals who have provided exceptional service and advancement to IPC and the electronics industry. Ford, an industry leader and valued IPC volunteer, died suddenly in January 2024.
SEMI Applauds U.S. Chips Act Award for Samsung Electronics Facilities to Strengthen Domestic Semiconductor Supply Chain
04/17/2024 | SEMISEMI, the industry association serving the global electronics design and manufacturing supply chain, applauded the United States Department of Commerce’s announcement of a Preliminary Memorandum of Terms for an award under the CHIPS and Science Act to support the expansion of Samsung Electronics’ presence in Texas and the company’s development and production of leading-edge chips.
Northrop Grumman honors Calumet Electronics with Supplier Excellence Award
04/17/2024 | Calumet ElectronicsNorthrop Grumman Corporation has recognized Calumet Electronics during the company’s 2024 Supplier Excellence Awards for “exceptional performance and unwavering commitment to delivering with excellence.” Calumet is one of 70 suppliers recognized from across the globe. In its award category of “Supplier Strategic Excellence,” Calumet was honored alongside global corporations such as Amazon Web Services, Dell Technologies, and Eaton Corporation.
Ark Electronics Expands Global Manufacturing Factory Network in North America and Europe
04/17/2024 | PRNewswireElectronic Manufacturing Company Ark Electronics recently announced the expansion of its Global Factory Network with the addition of Electronics Manufacturing Service (EMS) capabilities in Mexico and Europe.
Signal Integrity Expert Donald Telian to Teach 'Signal Integrity, In Practice' Masterclass Globally
04/17/2024 | PRLOGDonald Telian and The EEcosystem announce the global tour of "Signal Integrity, In Practice," a groundbreaking LIVE masterclass designed to equip hardware engineers with essential skills for solving Signal Integrity (SI) challenges in today's fast-paced technological landscape.