-
- News
- Books
Featured Books
- smt007 Magazine
Latest Issues
Current IssueBox Build
One trend is to add box build and final assembly to your product offering. In this issue, we explore the opportunities and risks of adding system assembly to your service portfolio.
IPC APEX EXPO 2024 Pre-show
This month’s issue devotes its pages to a comprehensive preview of the IPC APEX EXPO 2024 event. Whether your role is technical or business, if you're new-to-the-industry or seasoned veteran, you'll find value throughout this program.
Boost Your Sales
Every part of your business can be evaluated as a process, including your sales funnel. Optimizing your selling process requires a coordinated effort between marketing and sales. In this issue, industry experts in marketing and sales offer their best advice on how to boost your sales efforts.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - smt007 Magazine
Improving the Rework Process
September 6, 2017 | Stephen Las Marias, I-Connect007Estimated reading time: 2 minutes
An optimized SMT assembly process typically provides a yield of nearly 100%. Technology advancements—from the solder paste printing process, SPI, and parts placement, to reflow and wave soldering and AOI—have pushed the efficiency and accuracy of these steps in the SMT process such that a board assembly should be perfect at the end of the line.
Still, EMS providers continually face the need to rework and repair PCBAs even after dialing in the perfect set-up; there will always be that insufficient solder, or excessive solder, or missing component on the board, among other issues. Chief among them is the continuous trend toward miniaturization in the industry—the ever-shrinking component sizes being placed and soldered onto boards with finer and finer pitch and spacing—which is putting a lot of pressure even in the rework and repair of such boards.
Also, with reliability being one of the top customer requirements, touching boards should be avoided because it increases the chances for damage, such as flexure or shearing of parts with the soldering iron on the back or front side, according to Gary Freedman, of Colab Engineering. He notes that every time a board passes through a repair cycle, that board will be of lesser reliability.
You need rework—there will always be a need for rework—but the more you do rework, the more touches a PCBA receives, the higher the chance its reliability decreases. What a Catch-22 situation.
For this month’s issue of SMT Magazine, we talked with BEST Inc.’s Dan Patten and Laura Ripoli, Circuit Technology Center’s Andy Price, and Freedman to find out more about the critical challenges in rework and repair of PCB assemblies, and which strategies to implement to improve the process and ensure the reliability of the boards.
Interestingly, one of the things they pointed out is the skills of the operators or technicians doing the rework. In the words of Andy Price, they should have "a tremendous amount of experience, hand skills, the ability to work using magnification for hours on end, knowledge, and patience." The skillset, according to him, is just not on the market, so you must find somebody with the right mindset and right capability to do the job. Once they are inside your doors, continuous training is required.
To read the full version of this article, which appeared in the September 2017 issue of SMT Magazine, click here.
Suggested Items
Taiyo Circuit Automation Installs New DP3500 into Fuba Printed Circuits, Tunisia
04/25/2024 | Taiyo Circuit AutomationTaiyo Circuit Automation are proud to be partnered with Fuba Printed Circuits, Tunisia part of the OneTech Group of companies, a leading printed circuit board manufacturer based out of Bizerte, Tunisia. on their first installation of Taiyo Circuit Automation DP3500 coater.
Vicor Power Orders Hentec Industries/RPS Automation Pulsar Solderability Testing System
04/24/2024 | Hentec Industries/RPS AutomationHentec Industries/RPS Automation, a leading manufacturer of selective soldering, lead tinning and solderability test equipment, is pleased to announce that Vicor Power has finalized the purchase of a Pulsar solderability testing system.
AIM Solder’s Dillon Zhu to Present on Ultraminiature Soldering at SMTA China East
04/22/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce that Dillon Zhu will present on the topic: Ultraminiature Soldering: Techniques, Technologies, and Standards at SMTA China East. This event is being held at the Shanghai World Expo Exhibition & Convention Center from April 24-25.
AIM to Highlight NC259FPA Ultrafine No Clean Solder Paste at SMTA Wisconsin Expo & Tech Forum
04/18/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce its participation in the upcoming SMTA Wisconsin Expo & Tech Forum taking place on May 7 at the Four Points by Sheraton | Milwaukee Airport, in Milwaukee, Wisconsin.
Hentec/RPS Publishes an Essential Guide to Selective Soldering Processing Tech Paper
04/17/2024 | Hentec Industries/RPS AutomationHentec Industries/RPS Automation, a leading manufacturer of selective soldering, lead tinning and solderability test equipment, announces that it has published a technical paper describing the critical process parameters that need to be optimized to ensure optimal results and guarantee the utmost in end-product quality.