RTW NEPCON South China: JBC Brings Digital Transformation to Hand Soldering Process


Reading time ( words)

Enrique Moreno, technical support engineer at JBC Soldering SL, and I-Connect007 Managing Editor Stephen Las Marias discuss the latest developments in the hand soldering process, including robotics and automation.

Moreno also talks about the opportunities in China, and why their Industry 4.0-enabled solutions are suitable for this market.

Watch The Interview Here

Share


Suggested Items

Reflow Perspectives to Flex Circuit Assemblies

07/13/2018 | Stephen Las Marias, I-Connect007
At the recent NEPCON China 2018 event in Shanghai, I spoke with Ralf Wagenfuehr, plant manager at Rehm Thermal Systems, to gain insight into flex circuit assembly, and the challenges of reflow soldering. He also speaks about the need for industry forums focused on soldering flex printed circuits.

Conversation with Miraco… Strategies for Successful Flex Circuit Assembly

07/11/2018 | Stephen Las Marias, I-Connect007
Jason Michaud, a 19-year veteran at Miraco Inc., is the company’s new vice president of sales. In an interview with SMT007 Magazine, Jason speaks about the factors driving the increasing utilization of flexible printed circuits, the challenges in flex circuit assembly, and the best practices to address those issues.

DFM: Top Ten PCB Concerns

07/09/2018 | Dan Thau, Millennium Circuits Ltd
DFM—design for manufacturability—is a critically important but often ignored aspect of the PCB design process that directly impacts product quality and reliability. This article will discuss the top 10 DFM concerns that should be part of any design review process.



Copyright © 2018 I-Connect007. All rights reserved.