The Beam of Invisibility
September 13, 2017 | TU WienEstimated reading time: 3 minutes
A new cloaking technology has been developed at TU Wien: a special kind of material is irradiated from above in such a way that another beam of light can pass completely uninhibited.
A material with random irregularities scatters an incident light wave into all directions.
How do we make an object invisible? Researchers from TU Wien (Vienna), together with colleagues from Greece and the USA, have now developed a new idea for a cloaking technology. A completely opaque material is irradiated from above with a specific wave pattern – with the effect that light waves from the left can now pass through the material without any obstruction. This surprising result opens up completely new possibilities for active camouflage. The idea can be applied to different kinds of waves, it should work with sound waves just as well as with light waves. Experiments are already in the planning.
Outwitting the Scattering of Light
“Complex materials such as a sugar cube are opaque, because light waves inside them are scattered multiple times”, says Professor Stefan Rotter (TU Wien). “A light wave can enter and exit the object, but will never pass through the medium on a straight line. Instead, it is scattered into all possible directions.”
For years many different attempts have been made to outwit this kind of scattering, creating a “cloak of invisibility”. Special materials have been worked out, for example, which are able to guide light waves around an object. Alternatively, also experiments have been performed with objects that can emit light by themselves. When an electronic display sends out exactly the same light as it absorbs in the back, it can appear invisible, at least when looked at in the right angle.
At TU Wien a more fundamental approach has now been chosen. “We did not want to reroute the light waves, nor did we want to restore them with additional displays. Our goal was to guide the original light wave through the object, as if the object was not there at all”, says Andre Brandstötter, one of the authors of the study. “This sounds strange, but with certain materials and using our special wave technology, it is indeed possible.”
The Laser Material
The team at TU Wien has spent years working on optically active materials, which are used for building lasers. To make the laser shine, energy has to be supplied by means of a pump beam. Otherwise, the laser material behaves just like any other material – it absorbs part of the incident light.
“The crucial point is to pump energy into the material in a spatially tailored way such that light is amplified in exactly the right places, while allowing for absorption at other parts of the material”, says Professor Konstantinos Makris from the University of Crete (previously TU Wien). “To achieve this, a beam with exactly the right pattern has to be projected onto the material from above – like from a standard video projector, except with much higher resolution.”
If this pattern perfectly corresponds to the inner irregularities of the material which usually scatter the light, then the projection from above can effectively switch off the scattering, and another beam of light travelling through the material from one side can pass without any obstruction, scattering or loss.
“Mathematically, it is not immediately obvious that it is at all possible to find such a pattern”, says Rotter. “Every object we want to make transparent has to be irradiated with its own specific pattern – depending on the microscopic details of the scattering process inside. The method we developed now allows us to calculate the right pattern for any arbitrary scattering medium.”
Light or Sound
Computer simulations have shown that the method works. Now the idea should be confirmed in experiments. Stefan Rotter is confident that this will be successful: “We are already discussing with experimentalists how this could be done. As a first step, we may test this technology with sound instead of light waves. Experimentally, they are easier to handle, and from a mathematical point of view, the difference does not matter significantly.”
Suggested Items
IDTechEx Examines the Opportunities for Wearables in Digital Health
04/19/2024 | IDTechExIDTechEx’s report, “Digital Health and Artificial Intelligence 2024-2034: Trends, Opportunities, and Outlook”, covers this ongoing trend in the consumer health wearables market and includes analysis of the opportunities and roadmap for biometric monitoring.
NCAB Appoints Tim Benjamin as New CFO
04/15/2024 | NCAB GroupNCAB Group has appointed Tim Benjamin as its new CFO. Tim has a long and broad experience of managerial business finance roles, including M&A and IT.
Plastronics and the New IPC Guidelines for In-mold Electronics (IME)
04/11/2024 | Barry Matties, I-Connect007In the ever-evolving world of electronics, the roads for the integration of electronics assemblies into 3D structures continue to grow into a set of technologies used to produce 3D plastronics parts and revolutionize mainly the automotive industry. IPC has been developing standards for this set of technologies, led by Francisco Fourcade, IPC electronics technology standards manager.
IEC USA Congratulates Bernie Consitt for 25 Years of Service
04/09/2024 | IECJoin us in celebrating Bernie Consitt's 25 years of service and camaraderie at IEC (International Electronic Components). Bernie has been instrumental in his role as Accounting Manager, helping to supervise, track, and evaluate day-to-day activities within the accounting team.
Helena Maripuu Joins Incap as Group Communication and IR Lead
04/08/2024 | IncapFrom 1 April, communications expert Helena Maripuu joined the headquarters and team of Incap, an international electronics manufacturing services company, to share her long-term experience in the communications and marketing industry and to take the lead in managing processes for Group communication and Investor Relations.