3D Printed Electronics for Printed Circuit Structures
October 4, 2017 | Samuel LeBlanc, Paul Deffenbaugh, Jacob Denkins, and Kenneth Church nSCRYPT INC.Estimated reading time: 1 minute
Abstract
Printed electronics is a familiar term that is taking on more meaning as the technology matures. Flexible electronics is sometimes referred to as a subset of this and the printing approach is one of the enabling factors for roll-to-roll processes. Printed electronics is improving in performance and has many applications that compete directly with printed circuit boards. The advantage of roll-to-roll is the speed of manufacturing, the large areas possible, and a reduction in costs.
As this technology continues to mature, it is also merging with the high-profile 3D printing. 3D printing is becoming more than just a rapid prototyping tool and more than just printing small plastic toys. Companies are embracing 3D printing as a manufacturing approach to fabricate complex parts that cannot be done using traditional manufacturing techniques. The combination of 3D printing and printed electronics has the potential to make novel products and, more specifically, to make objects electrically functional. Electrically functional objects have the advantage of competing with printed circuit boards.
Printed circuit structures will be a new approach to electronic packaging. It is the desire of many companies to reduce assembly processes, decrease the size of the electronics, and do this at a reduced cost. This is challenging, but the potential of printing the structure and the electronics as a single monolithic unit has many advantages. This will reduce the human touch in assembly, as the electronics and the object are printed. This will increase the ruggedness of the product, as it is a monolithic device.
This will eliminate wires, solder, and connectors, making the device smaller. This has the potential to be the future of printed circuit boards and microelectronic packaging. This article will show working demonstrations of printed circuit structures, the obstacles, and the potential future of 3D printed electronics.
To read the full version of this article which appeared in the September 2017 issue of The PCB Magazine, click here.
Suggested Items
AIM to Highlight NC259FPA Ultrafine No Clean Solder Paste at SMTA Wisconsin Expo & Tech Forum
04/18/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce its participation in the upcoming SMTA Wisconsin Expo & Tech Forum taking place on May 7 at the Four Points by Sheraton | Milwaukee Airport, in Milwaukee, Wisconsin.
Hentec/RPS Publishes an Essential Guide to Selective Soldering Processing Tech Paper
04/17/2024 | Hentec Industries/RPS AutomationHentec Industries/RPS Automation, a leading manufacturer of selective soldering, lead tinning and solderability test equipment, announces that it has published a technical paper describing the critical process parameters that need to be optimized to ensure optimal results and guarantee the utmost in end-product quality.
Empowering Electronics Assembly: Introducing ALPHA Innolot MXE Alloy
04/16/2024 | MacDermid Alpha Electronics SolutionsIn the rapidly evolving electronics industry, where innovation drives progress, MacDermid Alpha Electronics Solutions is committed to setting a new standard. Today, we are pleased to introduce ALPHA Innolot MXE, a revolutionary alloy meticulously engineered to address the critical needs of enhanced reliability and performance in modern electronic assemblies.
New Book on Low-temperature Soldering Now Available
04/17/2024 | I-Connect007I-Connect007 is pleased to announce that The Printed Circuit Assembler’s Guide to… Low-temperature Soldering, Vol. 2, by subject matter experts at MacDermid Alpha Electronics Solutions, is now available for download.
Inkjet Solder Mask ‘Has Arrived’
04/10/2024 | Pete Starkey, I-Connect007I was delighted to be invited to attend an interactive webinar entitled “Solder Mask Coating Made Easy with Additive Manufacturing,” hosted by SUSS MicroTec Netherlands in Eindhoven. The webinar was introduced and moderated by André Bodegom, managing director at Adeon Technologies, and the speakers were Mariana Van Dam, senior product manager PCB imaging solutions at AGFA in Belgium; Ashley Steers, sales manager at Electra Polymers in the UK; and Dr. Luca Gautero, product manager at SUSS MicroTec Netherlands.