Reading time ( words)
At the recent SMTA International 2017 exhibition, Jesper Lykke, engineering manager for USA of Viscom AG, and Zac Elliott, technical marketing engineer at Mentor, speak with I-Connect007 Managing Editor Andy Shaughnessy about Viscom's adoption of the Valor Process Preparation and how it is helping users with their inspection programming.
Watch the interview here.
Neil Sharp, JJS Manufacturing
Outsourcing part or all of your manufacturing to an electronics manufacturing service (EMS) provider can be daunting. Handing over some of the control of your business can be a scary prospect.
Stephen Las Marias, I-Connect007
The solder paste printing process has always been considered a major contributor to yield loss. According to many studies, solder paste printing accounts for up to 70% of all PCB assembly defects. For the December issue of SMT Magazine, we interviewed experts in the solder paste printing process to learn more about the key issues leading to this huge percentage of defects, and the technology developments that are addressing these challenges and improving yields in the process.
At the show floor of productronica 2017, I-Connect007 Technical Editor Pete Starkey speaks with Managing Director Harald Eppinger of Koh Young Europe GmbH about the principles of Koh Young’s total 3D inspection solution for SMT process optimization and yield improvement.