IC Insights Raises 2017 IC Market Forecast to +22%
October 19, 2017 | IC InsightsEstimated reading time: 1 minute
Strong growth to be driven by a 74% surge in the DRAM market and 44% jump in the NAND flash market.
IC Insights is set to release its October Update to The McClean Report. The 30-page Update includes a detailed analysis of IC Insights’ revised forecasts for the IC, O-S-D, and total semiconductor markets through 2021. Shown below is an excerpt from the Update.
IC Insights has raised its IC market growth rate forecast for 2017 to 22%, up six percentage points from the 16% increase shown in its Mid-Year Update. The IC unit volume shipment growth rate forecast has also been increased from 11% depicted in the Mid-Year Update to 14% currently. As shown below, a large portion of the market forecast revision is due to the surging DRAM and NAND flash markets.
In addition to increasing the IC market forecast for this year, IC Insights has also increased its forecast for the O-S-D (optoelectronics, sensor/actuator, and discretes) market. In total, the semiconductor industry is now expected to register a 20% increase this year, up five percentage points from the 15% growth rate forecast in the Mid-Year Update.
For 2017, IC Insights expects a whopping 77% increase in the DRAM ASP, which is forecast to propel the DRAM market to 74% growth this year, the largest growth rate since the 78% DRAM market increase in 1994. After including a 44% expected surge in the NAND flash market in 2017, including a 38% increase in NAND flash ASP this year, the total memory market is forecast to jump by 58% in 2017 with another 11% increase forecast for 2018.
At $72.0 billion, the DRAM market is forecast to be by far the largest single product category in the semiconductor industry in 2017, exceeding the expected NAND flash market ($49.8 billion) by $22.2 billion this year. As shown in the figure, the DRAM and NAND flash segments are forecast to have a strong positive impact of 13 percentage points on total IC market growth this year. Excluding these memory segments, the IC industry is forecast to grow by 9%, less than half of the current total IC market growth rate forecast of 22% when including these memory markets.
Suggested Items
Commercial Demand Continues to Be the Main Driver of Personal Computing Device Shipments into the GCC Region
03/26/2024 | IDCThe Gulf Cooperation Council (GCC) personal computing device (PCD) market, which is made up of desktops, notebooks, and workstations, declined 4.0% year on year in 2023, with high inventory levels and reduced consumer spending the primary causes.
Suppliers Aim to Raise Contract Prices, But With Uncertain Demand, 2Q24 DRAM Price Increase Expected to Narrow to 3–8%
03/26/2024 | TrendForceTrendForce’s latest report reveals that despite DRAM suppliers’ efforts to trim inventories, they have yet to reach healthy ranges. As they continue to improve their lose situations by boosting capacity utilization rates, the overall demand outlook for this year remains tepid.
LPKF Reports Strategic Successes and Narrowly Achieves Forecast for 2023 Financial Year
03/26/2024 | LPKFLPKF Laser & Electronics SE generated revenue of EUR 124.3 million in the financial year (previous year: EUR 123.7 million) and earnings before interest and tax (EBIT) of EUR 3.7 million (previous year: EUR 6.8 million), putting the EBIT margin at 3.0% (previous year: 5.5%).
Arlon EMD and EMC Announce Expansion in California
03/25/2024 | Arlon EMDArlon EMD, a division of Elite Materials Company (EMC), announces a factory expansion at the Rancho Cucamonga, CA location. Arlon is a global leader in high performance thermoset substrates for mission critical printed circuit boards manufactured for high endurance and long-life programs. Arlon has a 45-year history of manufacturing specialty materials for the Aerospace, Industrial and Military (AIM) markets.
Intraratio Enhances MES + Yield / IoT Management with New Advanced Manufacturing Analytics
03/22/2024 | IntraratioIntraratio announced AICard, which harnesses the power of artificial intelligence and machine learning to empower manufacturers to make informed decisions quickly and accurately regarding product quality and manufacturing line performance and optimization.