Creating the Perfect Solder Joint


Reading time ( words)

What are the characteristics of a good solder joint? Generally, from a visual standpoint, they should be smooth, bright, shiny, clean, and have a nice concave solder fillet. At least, these characteristics describe solder joints for through-hole components. What about for surface-mount devices? Or bottom terminated components? Moreover, how do you ensure that inside those joints, good intermetallic bonds are formed?

Since all solder joints aren’t created equal, the first step is to understand what is expected or required of that joint, according to Rick Short of Indium Corp., during my interview with him at the recent NEPCON South China trade exhibition in Shenzhen, China.

Solder joints play several different roles, and they represent several different opportunities to be a problem, a partial improvement, or a complete improvement. For example, there are solder joints that are necessary for physical strengths, such as holding components, like connectors. We often wiggle and yank our phone jacks—there’s a little bit of solder trying to hold all that together, and we keep doing it over the course of ownership of the device. So, those joints must be very robust with regard to physical strength. Other solder joints are merely there to conduct electricity. They don’t have much of a harsh life at all, and it is a relatively easy life for them. Other solder joints, meanwhile, are involved in very high heat dissipation demands. They must conduct electricity and heat, and they might also need to address physical strength issues. So, many different opportunities exist for solder joints to either cause you problems or contribute to the success of your finished goods.

Nobody, including myself, wants field failure. I often travel overseas for work, so I definitely don’t want the airplane I’m on to experience that "field failure." But going back to our topic on solder joints, I vividly recall that fatal plane crash a few years ago that was mainly caused by cracked solder joints in the subassembly unit that controls the rudder. The crash was tragic, but the cause of it is also the reality. I am not sure about the other technical details on the plane, but it had already logged 23,039 flight hours since its manufacture, and 13,610 cycles (an aircraft cycle means takeoff and landing).

Just imagine the many hours that these PCB assemblies have been subjected to harsh conditions—component breakdowns are inevitable. Which is why the reliability of PCB assemblies remains very critical.

In our recent survey on soldering, we identified many challenges to address during the soldering process to ensure good solder joints. These include solder paste selection, thermal issues and reflow profiles, voiding, and component size variations, to name a few.

To read the full version of this article, which appeared in the October 2017 issue of SMT Magazine, click here.

Share


Suggested Items

Tips to Improve Soldering Tip Life and Reduce Cost

10/10/2018 | Thermaltronics
Whether in production, or repair and rework, the cost of soldering iron tips can be easily overlooked, but with today’s requirement for higher temperatures in lead-free solder applications, the consumption of tips has dramatically increased. This fact, combined with changes in tip design to meet the higher thermal load requirements, has also resulted in escalating tip costs, making tip care a high priority.

Indium on Voiding and Auto Electronics Test Standard

10/09/2018 | Stephen Las Marias, I-Connect007
In this interview with I-Connect007, Indium Corporation Technical Manager Jonas Sjoberg discusses voiding and other key challenges in soldering, as well as an automotive electronics testing standard based out of South Korea that is seeing increased utilization all over Asia. He also talks about the increasing trend in manufacturers moving to Type 5 and Type 6 solder powders, and how this is causing its own set of challenges in printing.

RTW NEPCON South China: Rehm Sees Growing Demand for Vacuum Soldering

09/28/2018 | Real Time With... NEPCON South China
Ralf Wagenfuehr, plant manager of Rehm Thermal Systems (Dongguan) Ltd, speaks with I-Connect007’s Edy Yu about the developments in the company’s convection reflow soldering system, which features a vacuum module, aimed at addressing the increasing demand for vacuum soldering. He also discusses their software developments, as well as how they are helping their customers toward their Industry 4.0 journey.



Copyright © 2018 I-Connect007. All rights reserved.