Metcal to Showcase Latest Soldering Solutions at SMTA New England

Reading time ( words)

Metcal announces plans to exhibit at the SMTA New England Expo & Tech Forum, scheduled to take place November 16, 2017 at the DCU Center in Worcester, Worcester. The company will showcase its Connection Validation (CV) Soldering System with new CV Monitoring Software, and its brand new HCT2-200 Digital Hot Air Pencil and AC-STC Solder Tip Cleaner.

The CV Soldering System evaluates the quality of the solder joint by calculating the intermetallic compound formation and providing closed-loop feedback to the operator, mitigating risk in the process. Additionally, Metcal just released the CV Monitoring Software that will improve your solder process traceability and create a performance baseline to quickly analyze your soldering performance, identify changes in your solder conditions, and allow you to make changes to your process.

The HCT2-200 Digital Hot Air Pencil was developed for very small surface mount component and package sizes (1206s and smaller) and low board densities. As component miniaturization continues (e.g. 01005 components), the ergonomics of a pencil become more important to allow a user freedom to access and rework components on the board without affecting adjacent parts.

The AC-STC Solder Tip Cleaner features a replaceable brush system that pulls excess solder away from the tip into a removable collection tray for disposal while removing oxidation from the tip. Solder tips represent a significant portion of the cost of ownership for a solder station, and Metcal’s new Solder Tip Cleaner removes oxidation and extends the life of the solder tip. By placing the tip into the opening, the AC-STC Solder Tip Cleaner senses the tip and automatically activates, saving the operator time.

About Metcal

Metcal is a benchtop solutions expert that has delivered broad value to customers since its Silicon Valley beginnings in 1982. Offering unrivalled performance, risk mitigation, and ROI, we give electronics manufacturers in automotive, aerospace, medical devices and military sectors the tools—and the confidence—they need to develop faster, safer, more advanced products. Metcal provides advanced technology products across hand soldering, convection rework, fume extraction, and fluid dispensing applications. For more information, visit


Suggested Items

Cleaning with Data

03/19/2018 | Barry Matties, I-Connect007
Tom Forsythe, vice president of KYZEN, spoke to Barry Matties about KYZEN’s new process control monitoring and data service. They discussed the drivers behind these developments, the company's focus on managing data, and how KYZEN plans to support an industry embracing more cleaning and Industry 4.0.

Manufacturability: Pad Relief and Mask Relationship to Solder Joint Volume

03/09/2018 | Ken Horky, Peterson Manufacturing
Electronic assembly thermal management has always been an issue but has become more significant as we pack more power and function into a smaller form factor. In recent years, the growing use of LEDs for illumination on a large scale has presented additional thermal demands.

RTW IPC APEX EXPO: Indium Discusses Fighting Solder Voids

03/06/2018 | Real Time with...IPC
Voiding has increasingly become one of the most critical challenges in the soldering process. In this interview, Christopher Nash, product manager for the PCB assembly solder paste business of Indium, speaks about how the company is helping customers address the voiding challenge.

Copyright © 2018 I-Connect007. All rights reserved.