Aismalibar to Present Fastherm at productronica 2017


Reading time ( words)

Aismalibar is set to present their newest product offering, FASTHERM, at productronica which will be held in Munich, Germany from November 14-17, 2017.

FASTHERM was developed by Aismalibar to achieve a faster thermal transition from the LED thermal pad to the heat sink. This technology allows LEDs to operate at a temperature 30°C to 50°C lower due to the direct thermal transition from the thermal pad to the heat sink. This superior thermal transition can be achieved by using the entire COBRITHERM HTC product range with either a copper or copper/aluminium base.

Aismalibar – Benmayor will display at productronica Hall B3 Booth 351

About Aismalibar

Aismalibar was one of the first IMS laminate manufacturers in the world and was the first in Europe. Aismalibar is proud to introduce their material to the North American market in 2012. Their product IMS Cobritherm  is a qualified and recognized Insulated Metal Substrate which gives the best thermal management solutions with high thermal conductivity, low thermal impedance and high dielectric capacity. Aismalibar has implement a 100% proof test with 1-3KV (High Pot Test) to all IMS laminates coming out of their plant. This is the only way to insure the dialectical strength is perfect and that production problems are detected before PCBs arrive to the end user.

Share


Suggested Items

The IPC High-Reliability Forum for Mil-Aero and Automotive Sectors

09/24/2018 | Happy Holden, I-Connect007
I-Connec007’s Happy Holden had the pleasure of attending IPC’s High Reliability Forum (HRF) in Baltimore in May. As the IPC scripted it, it was a “Technical Conference with a Focus on Electronics Subjected to Harsh-Use Environments.”

PCB Design, Fabrication and Use from the Mil-Aero End-User Perspective

08/28/2018 | Pete Starkey, I-Connect007
The procedures described for Rolls Royce were directly comparable with those described for MBDA, and the presenters were unanimous in re-emphasising the importance of working closely with their chosen PCB fabricators at all levels and all stages of design, qualification and production of their circuit boards.

Thermal Capabilities of Solder Masks: How High Can We Go?

08/24/2018 | Sven Kramer, Lackwerke Peters
This article focuses on three different coating material groups that were formulated to operate under high thermal stress and are applied at the printed circuit board manufacturing level. While used for principally different applications, these coatings have in common that they can be key to a successful thermal management concept especially in e-mobility and lighting applications.




Copyright © 2018 I-Connect007. All rights reserved.