Aismalibar to Present Fastherm at productronica 2017


Reading time ( words)

Aismalibar is set to present their newest product offering, FASTHERM, at productronica which will be held in Munich, Germany from November 14-17, 2017.

FASTHERM was developed by Aismalibar to achieve a faster thermal transition from the LED thermal pad to the heat sink. This technology allows LEDs to operate at a temperature 30°C to 50°C lower due to the direct thermal transition from the thermal pad to the heat sink. This superior thermal transition can be achieved by using the entire COBRITHERM HTC product range with either a copper or copper/aluminium base.

Aismalibar – Benmayor will display at productronica Hall B3 Booth 351

About Aismalibar

Aismalibar was one of the first IMS laminate manufacturers in the world and was the first in Europe. Aismalibar is proud to introduce their material to the North American market in 2012. Their product IMS Cobritherm  is a qualified and recognized Insulated Metal Substrate which gives the best thermal management solutions with high thermal conductivity, low thermal impedance and high dielectric capacity. Aismalibar has implement a 100% proof test with 1-3KV (High Pot Test) to all IMS laminates coming out of their plant. This is the only way to insure the dialectical strength is perfect and that production problems are detected before PCBs arrive to the end user.

Share


Suggested Items

Ventec: Eye on the Future, with Automotive and Lighting Front and Center

12/19/2017 | Pete Starkey and Patty Goldman, I-Connect007
Ventec’s Thomas Michels and Didier Mauve sat down with I-Connect007 Editors Patty Goldman and Pete Starkey and enjoyed an upbeat and enlightening conversation. Among the topics covered were the importance of working partnerships in maintaining supply chain continuity, market drivers for thermally conductive materials, and development of enabling technologies to support the automotive electronics revolution.

A Fresh Look at Outsourcing Solutions in Electrical Testing

12/18/2017 | Pete Starkey, I-Connect007
In this interview conducted at productronica 2017, Gardien Group COO Roland Valentini describes to Pete Starkey the limitations of the traditional outsourcing model for electrical testing and explains the need for customised solutions directly catered to customers’ individual requirements.

Viking: Covering the Globe with Value-Added Services

12/14/2017 | Barry Matties, I-Connect007
In the final hours of productronica 2017, Barry Matties met with Jake Kelly of Viking to discuss the company’s value-added services, their growth in the India and America markets, and the UCE manufactured line they displayed at productronica.



Copyright © 2018 I-Connect007. All rights reserved.