-
- News
- Books
Featured Books
- smt007 Magazine
Latest Issues
Current IssueIPC APEX EXPO 2024 Pre-show
This month’s issue devotes its pages to a comprehensive preview of the IPC APEX EXPO 2024 event. Whether your role is technical or business, if you're new-to-the-industry or seasoned veteran, you'll find value throughout this program.
Boost Your Sales
Every part of your business can be evaluated as a process, including your sales funnel. Optimizing your selling process requires a coordinated effort between marketing and sales. In this issue, industry experts in marketing and sales offer their best advice on how to boost your sales efforts.
The Cost of Rework
In this issue, we investigate rework's current state of the art. What are the root causes and how are they resolved? What is the financial impact of rework, and is it possible to eliminate it entirely without sacrificing your yields?
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - smt007 Magazine
Solder Preforms 101: Ask the Expert
November 13, 2017 | Patty Goldman, I-Connect007Estimated reading time: 6 minutes
One reason (of many) the SMTA International show is such a wonderful learning experience for me is because it is assembly-focused and I’m a PCB bare board person. When I sat down with Jerry Sidone, from Alpha Assembly Solutions, I learned a great deal about solder preforms, something I barely knew existed before.
Patty Goldman: Jerry, tell me a little bit on your background with Alpha.
Jerry Sidone: I'm a product manager for the engineered materials, which encompasses the solder preform business for Alpha. I'm here to talk about a new solder preform product that we're introducing here at SMTAI; we presented a technical paper on it at the conference. It is a new void reduction solution and it’s a very compelling product that addresses voiding under bottom termination components.
Goldman: I'm a printed circuit board person, and I’m not familiar with solder preforms. What is the purpose of a solder preform?
Sidone: Solder preforms have been used for many years and they are produced in many different shapes and sizes and available in most any solder alloy. One of the most appealing characteristics of solder preforms are they are 100% alloy. Hence, the solder volume is controlled very precisely and consistently wherever they are utilized. Preforms are primarily used to add solder volume wherever solder paste volume is not sufficient.
By far the most popular type of preform in the market today are our standard tape and reel preforms. They're small rectangular preforms, sized to standard chip capacitor packages (i.e., 0201, 0402, 0603, etc.) and packaged in tape and reel format. The advantage of tape and reel preforms is the ease of implementation in any surface mount assembly process. They can be selectively placed anywhere on the board to increase solder volume. They are commonly used to provide 100% hole-fill and to increase solder volume on a surface mount pad.
Goldman: Or if you have a recessed area or something like that? What about flux?
Sidone: Preforms are 100% solder alloy, so they must rely on the flux from the solder paste to generate the activity necessary to solder.
Goldman: Are they always used in conjunction with paste?
Sidone: Not always.
Goldman: But if you were placing them you would have to put them on the paste, wouldn't you? Otherwise they’re not going to stick, right?
Sidone: That's right. In these types of applications, preforms must be placed in the paste. The rule of thumb is to place the preform with a minimum 25% in contact with the solder paste. This will allow them to flow and liquefy within the solder paste to form a reliable solder joint.
Goldman: That's the neat thing about solder, the surface tension pulls things together.
Sidone: At Alpha, we also manufacture fluxed preforms. It allows the preform to stand alone without the need for solder paste or flux paste. Fluxed preforms are offered with a core flux, similar to cored wire or flux coated with a dry rosin flux. The type of fluxed preform used is application dependent. The product that we are introducing today uses a special flux-coated preform to address problematic voiding.
One of the biggest reliability issues in assembly today is voiding under bottom termination components, or BTCs, as they are known in the industry. BTCs are surface mount power management devices that come in leaded and leadless packages. They are identified by the large metalized pad located on the bottom side of the device. The pad is used to both electrically ground and as a thermal heatsink for the device. Excessive voids in the thermal pad’s solder joint causes inefficiencies in heat transfer and can reduce the life of the component.
Goldman: Then your goal is to minimize it, of course.
Sidone: Yes, and this new void reduction solution does just that. A number of documented methods can reduce voids under BTCs. The most common and effective means is printing grid patterns using solder paste. The channels formed in the solder paste provide an escape path for the gases during reflow. The problem our customers have experienced with this sort of solution is the inconsistency in the resultant voids. In the past, inconsistencies have not been an issue when voiding to 25–50% was allowable, but with some of our customers pushing void targets to less than 15% or 10%, inconsistencies in voiding are not acceptable.
Goldman: Is that random, or are there certain variables?
Sidone: Many factors contribute to voiding, including SMT equipment types, solder pastes, component types, reflow profiles and others. Alpha’s solution attempts to minimize the impact from as many factors as possible. We have spent the last couple of years developing our new low void technology, engaging with key customers and component suppliers to identify the primary causes of voiding. The output and result of that work is an effective micro-flux coated preform system that consistently reduces voiding under BTCs. We call it AccuFlux BTC-578 Preform System. It features a special micro-flux coated preform and includes a comprehensive review of the customer’s process. We consider such things as reflow parameters, stencil design, solder paste selection and more to offer the most consistent and effective total void reduction solution.
Goldman: Sounds interesting. What makes your new low-void solution so unique?
Sidone: Our approach is to engage with the customer to identify the appropriate void solution in their application and offer the lowest total cost of ownership. Whether it is one of our low void pastes, preform solutions or a tweak to the customer’s process parameters, we will provide the appropriate solution based on the customer’s requirements.
Goldman: You can advise them.
Sidone: Yes. We can advise them and recommend the best void solution to match their existing process.
Goldman: Now, because they've got many components on their board, suppose there's some that need one type and some that need another. For one component you should do this, and for another one you do that. Do you advise them for every type of component?
Sidone: Typically, there are not more than one or two different types of components so sensitive to voiding on a board. We will recommend the overall best void reduction solution.
Goldman: And you have the data to back it up, which builds confidence for your customers.
Sidone: That's right. That was the key. For instance, we collected over 9,000 data points in our “BTC-578” DOE, not to mention all the preliminary studies that took place prior to selecting the variables for the DOE. A significant amount of data that gives high confidence in our void reduction solution. In fact, we have seen voiding consistently less than 10% or 15% using this new technology in standard reflow atmospheres.
Page 1 of 2
Suggested Items
Indium Corporation, Industry Partners to Showcase Products “Live@APEX”
03/26/2024 | Indium CorporationIndium Corporation®, in cooperation with its industry partners, will feature its proven solder solutions live on the show floor throughout IPC APEX Expo from Apr. 9‒11 in Anaheim, Calif., U.S.
ITW EAE Wins New Product Introduction Award for Electrovert® Wave Soldering Machine Deep Wave
03/26/2024 | ITW EAEITW EAE is proud to announce that it has earned a 2024 New Product Introduction (NPI) Award for Electrovert’s Deep Wave option for wave soldering machines. This new, innovative system provides the ability to pump up to a 20 mm wave height.
Mek's Next-Gen AOI Technology Takes Center Stage at IPC APEX EXPO 2024
03/19/2024 | MEKMek is excited to announce its presence at IPC APEX EXPO, North America's largest electronics manufacturing event, in Anaheim, California, from April 6-11, 2024. Attendees are invited to visit Mek at booth #1433 to explore the latest AOI technology offerings.
Nihon Superior Sets New Standards in Lead-Free Soldering Technology at APEX 2024
03/13/2024 | PVANihon Superior Co. Ltd., an advanced joining material supplier, will exhibit in Booth 1325 during the 2024 IPC APEX EXPO, scheduled to take place April 9-11, 2024 at the Anaheim Convention Center in California.
Apollo Seiko Presents the Next Frontier in Non-Contact Soldering at 2024 IPC APEX EXPO
03/12/2024 | Apollo SeikoApollo Seiko, a leading innovator in soldering technology, is pleased to announce plans to showcase its latest advancements at Booth 1408 during the 2024 IPC APEX EXPO, taking place April 9-11, 2024 at the Anaheim Convention Center in California.