LED Technologies and Emerging Applications are Driving the Revolution
November 27, 2017 | Yole DéveloppementEstimated reading time: 2 minutes
The 2016 horticultural lighting market (i.e. system level) represented a business of about $3.1 billion, which should grow to approximately $3.8 billion in 2017. The current business is mostly driven by greenhouse applications and incumbent technologies, representing respectively 92% and 79% (in revenue) of the total market in 2017. However a transition to LED technology and the emergence of new applications will further increase this market’s size and attractiveness, both at system and LED device levels.
Yole Group of Companies expects the horticultural lighting market to reach nearly US$8.6 billion in 2022 with 17.8% CAGR between 2016 and 2022. “This is only a starting point”, comments Pierrick Boulay, Technology & Market Analyst at Yole. “Therefore, indoor/vertical farms are poised to boom from 2022 - 2027, propelling the total market to more than $17 billion in 2027.”
Moreover, at the LED device level, market opportunity represents almost $100 million in 2017 and should grow to about $400 million in 2022. The horticultural LED Lighting technology & market analysis from Yole Group of Companies is showing a $ 700 million market in 2027.
In a global lighting market that is becoming increasingly competitive, horticultural lighting is seen by the LED lighting industry as a new opportunity for which to develop high added-value products and reap greater margin levels. However, established LED players also face competition from new entrants, mostly start-ups and SMEs, desiring their own share of this growing opportunity.
As of Q4/2017, the LED horticultural lighting industry is still small, with less than 50 players identified as offering dedicated LED-based systems. The industry is highly concentrated in North America with a 50% market share (number of companies involved), the result of medicinal cannabis’s legalization.
“Looking ahead, industry evolution will strongly depend on market dynamics,” explains Joel Thomé, PISEO’s CEO. “Indeed, industrial players’ marketing and communications are currently focused on two main applications including medicinal plants (mostly cannabis) production, which is today the main market driver and vegetable production, which is developing with a “low-end / high-volume products” focus.”
Part of the established lighting system industry may never proceed with the medicinal plants application, in order to preserve brand reputation. Such a situation is likely to benefit new entrants that will generate revenue swiftly and rapidly increase their horticultural lighting market expertise.
At the device level, most LED manufacturers embrace a “technology push strategy”, taking advantage of their traditional LED portfolio (i.e. UV, visible, and NIR LEDs) to quickly offer some horticultural lighting solutions and related marketing tools, such as dedicated datasheets. In the future, with a better understanding of LED light’s effect on plant growth, these players might start offering more dedicated solutions (i.e. fine-tuned wavelength package, multiple wavelength package, etc.). The missing block in the supply chain is mostly at the module level, with no real supplier in 2017 – reason being that the market is still emerging and the industry is still young, with no standards and regulations. In this context, each lighting system manufacturer design its own module with a specific wavelength mix/recipe.
Some companies are finally starting to position themselves as solution providers, offering not only lighting systems but global solutions integrating sensors (humidity, oxygen, etc.) and data management software. The objective of these smart lighting systems is to further increase the productivity of greenhouses and urban farms.
Yole Group of Companies pursues its investigation towards the LED industry. Analysts are daily following the evolution of the industry to identify emerging applications and disruptive technologies. Yole Group of Companies is daily debating with leading companies to understand technical breakthroughs and market issues.
Suggested Items
SMC Korea 2024 to Highlight Semiconductor Materials Trends and Innovations on Industry’s Path to $1 Trillion
04/24/2024 | SEMIWith Korea a major consumer of semiconductor materials and advanced materials a key driver of innovation on the industry’s path to $1 trillion, industry leaders and experts will gather at SMC (Strategic Materials Conference) Korea 2024 on May 29 at the Suwon Convention Center in Gyeonggi-do, South Korea to provide insights into the latest materials developments and trends. Registration is open.
Elevating PCB Design Engineering With IPC Programs
04/24/2024 | Cory Blaylock, IPCIn a monumental stride for the electronics manufacturing industry, IPC has successfully championed the recognition of the PCB Design Engineer as an official occupation by the U.S. Department of Labor (DOL). This pivotal achievement not only underscores the critical role of PCB design engineers within the technology landscape, but also marks the beginning of a transformative journey toward nurturing a robust, skilled workforce ready to propel our industry into the future.
Real Time with... IPC APEX EXPO 2024: Going Vertical: SCHMID's Advanced Solutions for Printed Circuit Boards
04/24/2024 | Real Time with...IPC APEX EXPOEditor Marcy LaRont chats with Bob Ferguson, the president of SCHMID, about advanced solutions for PCBs and the equipment they are highlighting at this year's show. He delves into vertical no-touch handling systems and the prospect of achieving sub-10-micron lines. Inspired by SCHMID's technology, Bob expresses excitement about where the industry is today.
Big Win for Defense Production Act Budget Allocation in FY24 Budget
04/23/2024 | I-Connect007 Editorial TeamOne year ago, President Biden issued a determination that chips and packaging are critical for national security. Since that time, much work has been done to continue the conversation in Washington, elevating the importance of the entire chips value chain, and including printed circuit boards and substrates, without which chips cannot operate.
Zentech’s Board of Directors Announces the Return of Matt Turpin as President and CEO
04/22/2024 | Zentech ManufacturingTurpin draws upon over 35 years of experience in the electronics industry and has an 18-year history with Zentech. He previously served as President and CEO from 2006 to 2019 after which time he has remained active in the EMS industry as an advisor to Zentech and other industry organizations.