-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Sustainability Issue
Sustainability is one of the most widely used terms in business today, especially for electronics and manufacturing but what does it mean to you? We explore the environmental, business, and economic impacts.
The Fabricator’s Guide to IPC APEX EXPO
This issue previews many of the important events taking place at this year's show and highlights some changes and opportunities. So, buckle up. We are counting down to IPC APEX EXPO 2024.
Getting to Know Your Designer
In this issue, we examine how fabs work with their design customers, educating them on the critical elements of fabrication needed to be successful, as well as the many tradeoffs involved. How well do you really know your customer? What makes for a closer, more synchronized working relationship?
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
Isola: Evolving with the Market
December 26, 2017 | Barry Matties, I-Connect007Estimated reading time: 13 minutes
In this interview from productronica 2017, Isola’s Karl Stollenwerk discusses the decline of the laminate market in Europe over the past 17 years, current demands on raw materials, and Isola’s new strategy to remain competitive.
Barry Matties: Karl, how long have you been with Isola, and when did you become president?
Karl Stollenwerk: It's now 30 years ago that I started with Isola—1987. I started in sales and for many years I held a number of sales roles. In 2006 I became the MD of the Isola plant in Düren, Germany. In 2009, I took on the responsibility for the European operation of Isola. At that time, we had three plants, but following market trends, the European market in terms of base material for printed circuit boards has been shrinking the last 17 years.
Our booming year, 2000, was the last year we saw growth. After that, we just saw a reduction on the market side. Customers disappeared, market disappeared, suppliers disappeared and competitors disappeared. When I started in '87, there were 23 different laminators in Europe. Today, we have a couple. That’s a very short overview of the last 17 years.
Matties: But, you hit the high points, and the low points.
Stollenwerk: We were growing a lot during the ‘90s, and growing fast. At that time, we had six plants in Europe. Now we have just one. I think we were always following market trends, and trying hard to survive in a shrinking market. In the year 2000, the laminate market in Europe was 21 million square meters, and we did, at that time, 5.2 million square meters, only from the Düren plant. Today the market is 5.6 million, and we still have the capacity to do 5.2 million. That is reality.
Matties: It's a tough reality, isn't it?
Stollenwerk: Yes, that's true. But that is what I always tell my people. It's a tough world, but we are still there and successful.
Matties: With it being such a tough world, I know that there's been some management shifts, and new directions set for Isola. How is that playing in from your role? What's shifting, and what do you think the impact is?
Stollenwerk: I would say number one, as I said, the market in Europe has been shrinking for years and we had to adapt ourselves accordingly. We were able to adapt, and we are still doing all the base material that is needed, starting from the standard Tg material, up to the high-Tg and high-frequency product. The strategy is very simple; we are producing in all three regions, and Europe is just one of the three regions. We are doing OEM marketing in all three regions. In a lot of cases, we start here with low-volume, high-mix. Then when it comes to real high-volume, we have to accept that it goes in other regions, especially to the Asian region. That is one part of the new Isola that is focused to start where it is developed, and to follow the market and the needs immediately where they want to do the volume. That is what we are doing, not being scared about doing something, and then losing it later. That is business.
Matties: Well, you're doing it by strategy now, rather than reaction. That's the difference I'm taking away from my interviews with people at Isola.
Stollenwerk: Exactly, and that is also important for the people in the plant; they have to and will understand that this is part of the business model. Therefore, that is where the influence is coming for that new model and strategy.
Matties: The new model is driven by the loss of market, right?
Stollenwerk: Right.
Matties: We don't change until we feel pain. You guys were feeling some pain, and you made some changes.
Stollenwerk: Correct. The other strategy is coming from our new management; we want to produce in all three regions, which is also an important statement for people who are working in a shrinking market. And, we are also dedicated to do R&D in all three regions.
Matties: Because the needs are different. In Europe, aren’t there about 300 shops?
Stollenwerk: I would say about 230.
Matties: Are the needs in the North American and European market so terribly different?
Stollenwerk: I would say from the technology point of view, we have different market segments. We have a very strong automotive business here, which is 20% of the total European demand for base material. We have another 50%, which is industrial, low-volume, high-mix. We don't have a lot of sophisticated products like the high layer-count laminates for the servers. This is a typical U.S. market. That is the difference. In the U.S., the average layer count is 15, 20, or above. We don’t have that much layer count in average in Europe. That means we have a lot of thicker base material and even more rigid material than in the U.S. The other difference is that in U.S., the market starts with a Tg of 170. We instead start at 130. From the U.S. point of view, Europe is doing a lot of low-Tg stuff. We are saying it is the standard Tg. You can see already the difference. These are the differences, but what is similar is that post-markets in the U.S. and Europe have been shrinking over the years.
Matties: The other issue is cost, or selling price. You had to lower your selling price to really be competitive.
Stollenwerk: Yeah, we were able, over the years, to restructure in a positive way. Taking cost out and what is not needed. Providing good service in the way of short lead times.
Matties: Was that a difficult process to remove cost?
Stollenwerk: Yes, and it still is difficult.
Matties: Painful, I would think too.
Stollenwerk: In 2000, looking back on the 5.2 million square meter output, we were doing that with 1,050 people in Europe. We were doing it in a four-shift model with seven days, 24 hours. Today, we are running between five and six days, three shifts, with 320 people. If we were able to get the whole 5.2 million, then we would have to add a fourth shift. But, then we would do the 5.2 million with about 420 to 440 people.
Matties: So, it’s about 40%, or thereabouts, of what you had previously.
Stollenwerk: Right.
Matties: What were the greatest gains in efficiency that allowed you to do this?
Stollenwerk: A lot of internal logistics. The big change was to change the production logistic from make-to-store to make-to-order. Accept the low-volume, high mix, and be very flexible in that. We learned from the U.S., for example, the quick-turnaround business. We started to do quick-turn in 2010. Before that, we never did it. I think these were really major changes in our world, like, let's say, the lean activity over the years. The same comparison can be made in terms of used building space and area. In 2000, we were occupying 40,000 square meters of buildings. Today, it is exactly half, 20,000. That means we have reduced a lot of internal transportation. We have reduced a lot in terms of different machinery.
We were putting in Lean, and a one-piece flow wherever possible. We are doing a lot of automation in order to reduce labor costs further. The beauty, over the years, is that we were pushed to increase automation to reduce labor, just for cost reasons. In the meantime, automation has brought, in addition to much higher quality, much more stable quality. Companies in Asia, especially in China, have 20-25% changeover in terms of people, and we have a changeover of 1% or even less. That means that our people have knowledge, and the average of all our 320 employees is 21.5 years of service. A lot of people have been working here for many years, which means people have a lot of experience.
Page 1 of 3
Suggested Items
Trouble in Your Tank: Supporting IC Substrates and Advanced Packaging, Part 5
03/19/2024 | Michael Carano -- Column: Trouble in Your TankDirect metallization systems based on conductive graphite or carbon dispersion are quickly gaining acceptance worldwide. Indeed, the environmental and productivity gains one can achieve with these processes are outstanding. In today’s highly competitive and litigious environment, direct metallization reduces costs associated with compliance, waste treatment, and legal issues related to chemical exposure. What makes these processes leaders in the direct metallization space?
AT&S Shines with Purest Copper on World Recycling Day
03/18/2024 | AT&SThe Styrian microelectronics specialist AT&S is taking World Recycling Day as an opportunity to review the progress that has been made in recent months at its sites around the world in terms of the efficient use of resources:
Matrix to Exhibit at IPC APEX EXPO 2024 in Anaheim, CA
03/05/2024 | MatrixMatrix will be exhibiting at IPC APEX EXPO 2024, to be held on April 9-12, 2024, at the Anaheim Convention Center, Anaheim, CA.
The Chemical Connection: Getting to Know Your Vendor
02/16/2024 | Don Ball -- Column: The Chemical ConnectionAfter working for a capital equipment supplier for almost 50 years, I’ve found that the most important part of getting to know your vendor is good communication among all parties. While contact between fabricators of a constantly changing product line and the designers of those products may occur daily or weekly, conversations between you and your equipment supplier may be years apart. That lengthy gap often means that previous contacts may have been promoted, retired, or moved on to other opportunities. You may have also migrated to a new supplier with whom you have little or no history. In either case, you will be interacting with someone you are unfamiliar with (as they are with you). Therefore, it is essential for both sides to communicate clearly so expectations will align.
EIPC Winter Conference 2024, Day 2: A Closer Look at Global Trends
02/14/2024 | Pete Starkey, I-Connect007The opening session of the second day’s conference proceedings focused on global PCB trends and was introduced and moderated by Dr. Michele Stampanoni, vice president of strategic sales and business development at Cicor Group in Switzerland. He opened the session with Dr. Hayao Nakahara’s knowledgeable and enlightening video presentation on the IC substrates industry.