Ventec Highlights Advanced Ultra-Low Dk PCB Materials at DesignCon 2018


Reading time ( words)

Ventec International will showcase its extensive range of tec-speed materials for high-speed low-loss applications including the latest tec-speed 10 ultra-low dk material at DesignCon 2018 show in Santa Clara, California, USA from 30 January to 1 February in booth #118. A further highlight will be a next generation best-in-class, thermally conductive (8 X FR-4) high Tg thin-core and prepreg material (VT-5A2) ideal for hybrid multilayer low-loss constructions.

Ventec will be exhibiting at DesignCon 2018, the premier conference for chip, board, and systems design engineers, on booth #118 highlighting it’s tec-speed range of PCB materials for high-speed low-loss applications. By using an ultra-low Dk material with Dk values between 2.3 and 2.8 lower losses, lower system power requirements and with it the delicate balance of performance and cost can be achieved. Higher layer counts on backplanes, daughter cards and hand-held's are made possible in a smaller footprint by having smaller layer to layer separation without sacrificing trace width.

“Maintaining wider traces produces lower resistance in the signal path," said Martin Cotton, Director of OEM Technology Marketing. "Combining ultra-low Dk with a low Df of 0.003 to 0.004, produces an alternative to ever smaller traces and higher power requirements."

Ventec’s highest performance thermally conductive laminate material so far will also make its DesignCon debut. VT-5A2 offers a polymer matrix that is fully compatible with Ventec laminates, epoxy or polyimide based materials including tec-speed, making it the ideal choice for the manufacture of hybrid multilayer low-loss constructions.

Cotton and Peter Koolen, Global Account Manager for OEM Technology Marketing, will be on hand to offer technical advice.

About Ventec International

With volume manufacturing facilities and HQ in Suzhou China, Ventec International specializes in advanced copper clad glass reinforced and metal backed substrates for the PCB industry. With distribution locations and manufacturing sites in both the US and Europe, Ventec International is a premier supplier to the Global PCB industry. For more information, click here.

Share


Suggested Items

In Terms of Experience, a 10,000-foot View of China

01/17/2018 | Barry Matties, I-Connect007
In the past 30+ years of PCB manufacturing in China, you would be hard-pressed to find someone more connected to the pulse of the Asian market than Gene Weiner. Barry Matties met with the industry veteran at HKPCA to get his take on the show, the current and future market conditions of China, and any effect the new U.S. administration might have on trade relations going forward.

Isola: Evolving with the Market

12/26/2017 | Barry Matties, I-Connect007
In this interview from productronica 2017, Isola’s Karl Stollenwerk discusses the decline of the laminate market in Europe over the past 17 years, current demands on raw materials, and Isola’s new strategy to remain competitive.

Consulting in the Electronics Industry: Meet Francesca Stern

12/22/2017 | Patty Goldman, I-Connect007
One of the best things about productronica was meeting people who I have corresponded with and those whose articles or presentations I have read or seen but have never actually had a chance to chat with. Francesca Stern is one such person, and it was a true pleasure to sit down and chat with her in the EIPC booth.



Copyright © 2018 I-Connect007. All rights reserved.