IPC Committee Revises DSC Test Method for Tg


Reading time ( words)

IPC’s 3-11 Laminate/Prepreg Materials Subcommittee has announced the publication of the latest revision of the test method for the determination of glass transition temperature (Tg) of copper-clad laminates (CCL). IPC-TM-650 Method 2.4.25 utilizes Differential Scanning Calorimetry (DSC) to measure the Tg of the base materials for rigid printed circuit boards. The Tg is one of the characteristics used to estimate the thermal reliability of materials used in electronics.

The key change in the document clarifies what is and what is not a phase transition as the temperature approaches the Tg for the first time. In the past, the unusual exotherms or endotherms could be interpreted as being a Tg. There are a number of reasons cited for these spurious events including stress relief, release of moisture and evaporation of residual solvent. The Pre-Scan step is needed to make the baseline more stable for the calculation of Tg1 and Tg2. The Pre-Scan takes the temperature to about 10°C above the predicted Tg1, then the sample is cooled immediately back to the starting point temperature. The determination of Tg1 is then carried out by a second scan which terminates at either 175°C or 190°C depending of the type of epoxy resin system. At the termination temperature, the specimen is held at isothermal conditions for 15 minutes before cooling again to the starting point temperature. Finally, a third scan is conducted to determine Tg2. It is Tg1 and Tg2 that are used to calculate either the cure factor or the delta Tg.

All of the IPC-TM-650 test methods can be found free of charge at the IPC website, www.IPC.org under the “Knowledge” tab. 

Share


Suggested Items

PCB Material Toolbox for Today's 3G & 4G Networks and Future High-Speed Needs in 5G

06/21/2018 | Stig Källman, ERICSSON with Happy Holden, I-CONNECT007
The material toolbox idea first came up when I saw the IPC appendix list for standard 1-ply stack-ups. The idea is to make a very simple bill of materials, specifications and notes, and possibly use the same prepreg/resin in the laminate and in the core.

The Institute of Circuit Technology Annual Symposium 2018

06/18/2018 | Pete Starkey, I-Connect007
ICT technical director Bill Wilkie is well-known for choosing notable venues for Institute of Circuit Technology events, and his choice for this year’s Annual Symposium was the National Motor Museum, located in the village of Beaulieu in the heart of the New Forest, a national park in the county of Hampshire in Southern England. The region is known for its heathland, forest trails and native ponies.

Experts Discussion with John Talbot, Tramonto Circuits

06/06/2018 | I-Connect007 Editorial Team
For this first issue of Flex007 Magazine, we interviewed John Talbot, president and owner of Tramonto Circuits. Headquartered in metro Minneapolis, Minnesota, Tramonto manufactures flexible and rigid PCBs for a variety of industry segments. Editors Andy Shaughnessy, Patty Goldman and Stephen Las Marias asked John to discuss the challenges and opportunities in the world of flexible circuits, and some of the trends he’s seeing in this market.



Copyright © 2018 I-Connect007. All rights reserved.