-
- News
- Books
Featured Books
- smt007 Magazine
Latest Issues
Current IssueIPC APEX EXPO 2024 Pre-show
This month’s issue devotes its pages to a comprehensive preview of the IPC APEX EXPO 2024 event. Whether your role is technical or business, if you're new-to-the-industry or seasoned veteran, you'll find value throughout this program.
Boost Your Sales
Every part of your business can be evaluated as a process, including your sales funnel. Optimizing your selling process requires a coordinated effort between marketing and sales. In this issue, industry experts in marketing and sales offer their best advice on how to boost your sales efforts.
The Cost of Rework
In this issue, we investigate rework's current state of the art. What are the root causes and how are they resolved? What is the financial impact of rework, and is it possible to eliminate it entirely without sacrificing your yields?
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - smt007 Magazine
The Importance of Product Testing for Quality, Reliability and Durability
January 17, 2018 | Patty Rasmussen, East West ManufacturingEstimated reading time: 3 minutes
Product development takes time, creativity, resources, and more time. One really vital piece of the development process is product testing for quality, reliability and durability. You need to find out whether your product will do what it's supposed to do—that's quality. You also need to learn whether it will do what it's supposed to do over and over again, even when conditions aren't ideal—that's reliability and durability.
Product Testing
Some products, like Class III medical devices, require something called "Premarket approval" (PMA), the process of scientific and regulatory review administered by the Food and Drug Administration (FDA) to evaluate safety and effectiveness. Class III devices are those that support or sustain human life, are of substantial importance in preventing impairment of human health, or which present a potential, unreasonable risk of illness or injury.
But what about products that don't require FDA tests or approvals? Where do you go and what do you do when you're looking for solid, third-party validation to back up the claims you're making about your product?
Step one: Google. Seriously. Get online and start researching. Talk to people in your industry. Find out which product testing labs other folks are using.
Product testing is something that may be done either in-house (you or your manufacturer do the tests) or it's outsourced to an independent product testing agency. As much as you might think you want to be in control of the product testing, trust us: there are good reasons to outsource testing—chiefly cost. Maintaining a testing lab is expensive. It requires dedicated space, equipment (which must be maintained and repaired), upgrades, labor, training and certifications.
Types of testing include quality assurance, product reliability and lifecycle testing.
Testing is usually done during the development and manufacturing phases of product development. The outcome criteria are based on realistic expectations of customer use. Questions you need to ask include:
- How will this part or product be used?
- What sorts of pressures does it need to withstand - thermal, weight, etc.?
- How long should this product last?
The components that make up the product are selected based on the answers to the customer use profile. Perhaps the electronics or the raw material needs to be a certain grade or quality. Those items will be taken into account. Let's say you're making a medical device, for example. Components in medical devices must meet a higher standard than those going into a non-medical consumer electronics product.
During the manufacturing process, it's part of the quality process to test a product's functionality off the line. The quantity of items tested is determined in advance. It's also wise to test your product at the system level as the components are only as good as the sum of all the parts working together. Determine what the end results should look like and design the test(s) to rigorously examine how well the product/part performs.
Unlike quality testing, the purpose of which is to find defects early in the product development process, the main reason for reliability testing is to measure performance and endurance over the long haul—preferably in similar operational environments. When looking at the reliability of a group of products over a lifetime, you might hear experts describe something called the "bathtub curve."
The bathtub curve shows the decreasing failure rate during the early "infant mortality" days of the product, leading to the normal (a.k.a. useful) life of a product population and, finally, the onset of the end of life wear-out.
Stress testing from the earliest product development phase is meant to find design weaknesses and specific assembly and material problems. Highly Accelerated Life Testing (HALT) and Highly Accelerated Stress Test (HAST) introduce the types of real life problems a product may encounter during its lifecycle, without waiting the life of the product. For example, if corrosion could occur during the life of the product, the test would introduce corrosive material (salt water, for example) to the part/product to see if or how much the performance is affected.
Reliability testing is done for three specific reasons:
- To examine a product's endurance under certain conditions.
- To identify the failure rates of the product.
- If possible, to determine preventative measures that can increase the product's reliability and lifespan.
Typically, reliability testing will examine five areas:
- Vibration
- Temperature and humidity
- Time duration
- Number of test cycles
- Duration
To know more about building your own product reliability testing process, read the article titled What Is Reliability Testing by Jit Gupta of test, inspection, and certification company NTS.
This article originally appeared on the East West Manufacturing blog, which can be found here.
Suggested Items
embedded world 2024: Rohde & Schwarz Presents its Cutting-edge Test Solutions for Embedded Systems
03/27/2024 | Rohde & SchwarzEmbedded systems are the foundation of today’s electronic devices, spanning sectors as diverse as consumer electronics, telecommunications, industrial, medical, automotive and aerospace applications.
CentraTEQ to Showcase Wide Range of Vibration & Environmental Test Systems at Battery Tech Expo 24
03/26/2024 | CentraTEQEnvironmental and vibration test specialists CentraTEQ are excited to be exhibiting at the upcoming Battery Tech Expo, scheduled to take place at Silverstone on April 25, 2024.
PAWR Announces 5G Open RAN Testing with Mavenir at POWDER Testbed
03/15/2024 | BUSINESS WIREThe Platforms for Advanced Wireless Research (PAWR) Project Office announces a collaboration between PAWR platform POWDER and industry innovator Mavenir to test a first-of-its-kind O-RAN 5G SA network deployment with millimeter Wave (mmWave) spectrum.
IMI China (Jiaxing) Receives Five Invention Patent Awards
03/13/2024 | IMIIntegrated Micro-Electronics, Inc. (IMI), China (Jiaxing) Test and Systems Development (TSD) team recently received five National Invention Patent awards from the China National Intellectual Property Administration (CNIPA).
Testing Todd: Why 4-wire Kelvin?
03/08/2024 | Todd Kolmodin -- Column: Testing ToddAs William Thomson (Lord Kelvin) once said, “If you cannot measure it, you cannot improve it.” This is truer today than ever before. With the advances in microelectronics and nanoelectronics, HDI, and buried active/passive components, the signature of the printed circuit is critical. High-speed substrates rely on signal transmission to be as pristine as possible. Minor changes can cause impedance changes in standing wave ratio (SWR) elevation, which leads to degraded performance.