Indium Senior Product Manager to Present at APEC 2018


Reading time ( words)

Indium Corporation’s Andy C. Mackie, PhD, MSc, Senior Product Manager, Semiconductor and Advanced Assembly Materials, will present at APEC 2018, March 4-8 in San Antonio, Texas.

Dr. Mackie will present Joining Materials’ Reliability for Evolving Power Applications. This presentation will discuss the impact of form, application, and regulatory considerations on materials design criteria. It will also demonstrate how one materials supplier is meeting the plethora of customer needs for analog and power device manufacturability and reliability. 

Dr. Mackie is an electronics industry expert in physical chemistry, surface chemistry, rheology, and semiconductor assembly materials and processes. He has more than 20 years of experience in new product and process development, and materials marketing in all areas of electronics manufacturing, from wafer fabrication to semiconductor packaging and electronics assembly. Dr. Mackie has a doctorate in physical chemistry from the University of Nottingham, U.K., and a Master of Science in Colloid and Interface Science from the University of Bristol, U.K. He is also formally trained in Six Sigma – Design of Experiments.

About Indium Corporation 

Indium Corporation is a premier materials manufacturer and supplier to the global electronics, semiconductor, thin-film, and thermal management markets. Products include solders and fluxes; brazes; thermal interface materials; sputtering targets; indium, gallium, germanium, and tin metals and inorganic compounds; and NanoFoil. Founded in 1934, the company has global technical support and factories located in China, Malaysia, Singapore, South Korea, the United Kingdom, and the USA.

For more information about Indium Corporation, click here.

Share


Suggested Items

Configure to Order: Different by Design

01/09/2018 | Michael Ford, Aegis Software Corp.
When considering implementation of Industry 4.0 solutions, following the hype in the market, attention typically is focused on the need for communication between machines on the shop-floor. Knowing what is currently executing and the status of each process in the factory, as well as all the related resources and support operations, provides critical information for Industry 4.0 computerized management systems.

Step Stencil Technologies and Their Effect on the SMT Printing Process

12/21/2017 | Greg Smith and Bill Kunkle, BlueRing Stencils, and Tony Lentz, FCT Assembly
Components such as quad flat no lead (QFNs), land grid array (LGAs), micro ball grid array (micro BGAs), 0201s and even 01005s continue to push manufacturers to use thinner stencil foils to apply the correct volume of paste onto their boards, but larger components such as edge connectors still require larger paste volumes.

What Matters Most is Communication

12/04/2017 | Stephen Las Marias, I-Connect007
While there may be new techniques and strategies, technologies, equipment, tools, and materials to employ and utilize, there is always one thing that will ensure the manufacturing/ assembly success of your product: communication. Communication between the designer and the assembler will help improve the manufacturability and assembly of the final product—even before the board design gets fabricated.



Copyright © 2018 I-Connect007. All rights reserved.