Ultra-Sensitive Optomechanical Device at Room Temperature
February 19, 2018 | ICFOEstimated reading time: 1 minute
An ICFO study has developed an optomechanical device with the lowest thermal force noise levels ever, only attainable so far under cryogenic conditions.
Optomechanics investigates the interactions between light and matter with the use of mechanical resonators. Optomechanics can be used as an extremely sensitive instrument for the study of new physical phenomena at the nanoscale (e.g. spin physics, quantum electron transport, surface science, and light-matter interaction).
Carbon Nanotube resonators have shown to be excellent ultra-high sensitivity sensing devices for these type of studies. In addition, one of the main goals of using these devices is to be able to observe and manipulate the quantum states of the macroscopic mechanical devices, although, the drawback lies in the thermal noise force, which, if not controlled properly, ends up diluting the quantum effects.
In a recent study published in Nature Communications, ICFO researchers Alexandros Tavernarakis, Alexandros Stavrinadis, and Ioannis Tsioutsios led by ICFO Prof. Adrian Bachtold, in collaboration with Prof. Pierre Verlot (iLM, Lyon, visiting Scientist at ICFO 2014 – 2016) report on a novel optomechanical device with the lowest level of thermal noise at room temperature, two orders of magnitude below the current state-of-the-art devices so far. Such discovery makes this device the most sensitive scanning device ever built.
Their achievement has been possible thanks to the use of an optically active nanoparticle, placed at the tip of a single-clamp Carbon Nanotube (CNT) resonator. The absorptive nature of this nanoparticle has allowed the system to control its vibrational states without the use, for the first time, of an optical cavity or optical resonator that helps attenuate or amplify the vibrations. By precisely calibrating the temperature of the system, they were able to achieve at room temperature thermal force noise levels only attainable under cryogenic conditions.
Because of its scanning probe geometry, this novel system has proven to show its potential for a number of applications not only for quantum technologies, but also for mass spectroscopy, ultra-sensitive force sensing, surface imaging, and even nanoplasmonics.
Suggested Items
Inkjet Solder Mask ‘Has Arrived’
04/10/2024 | Pete Starkey, I-Connect007I was delighted to be invited to attend an interactive webinar entitled “Solder Mask Coating Made Easy with Additive Manufacturing,” hosted by SUSS MicroTec Netherlands in Eindhoven. The webinar was introduced and moderated by André Bodegom, managing director at Adeon Technologies, and the speakers were Mariana Van Dam, senior product manager PCB imaging solutions at AGFA in Belgium; Ashley Steers, sales manager at Electra Polymers in the UK; and Dr. Luca Gautero, product manager at SUSS MicroTec Netherlands.
NetVia Group Acquires Direct Imaging from Mivatek
04/09/2024 | Miva TechnologiesMiva Technologies is pleased to announce NetVia Group, Irving, TX has acquired a new Miva 2400NG Dual Tray Direct Imaging System with 30-micron capabilities for inner, outer and soldermask imaging.
Teledyne to Acquire Adimec
02/13/2024 | TeledyneTeledyne Technologies Incorporated announced that it has entered into an agreement to acquire Adimec Holding B.V. and its subsidiaries.
Real Time with... productronica 2023: MivaTek Global Advances Technology With High-res Imaging System
12/08/2023 | Real Time with...productronicaMivaTek's Brendan Hogan talks about how the company employs Digitally Adaptive Rasterization Technology (DART) in their high-res imaging equipment. He also shares how the blurred line between semiconductors and microelectronics is driving broader application of the imaging process.
Keysight Enables Validation of Arbe 4D Imaging Radar Chipset
11/30/2023 | Keysight Technologies, Inc.Keysight Technologies, Inc. announces that Arbe has selected the E8719A Radar Target Solution (RTS) to test the Arbe 4D imaging radar chipset for automotive applications.