Indium’s Sandy-Smith Earns IPC Distinguished Committee Service Awards at IPC APEX EXPO 2018


Reading time ( words)

Indium Corporation’s Brook Sandy-Smith, technical support engineer for PCB Assembly Materials, was recognized with two Distinguished Committee Service Awards from IPC at the IPC APEX EXPO on Wednesday, February 28 in San Diego, California.

The Distinguished Committee Service Awards recognized Sandy-Smith’s contributions to the development of Amendment 1 to IPC J-STD-006C, requirements for electronic grade solder alloys and fluxed and non-fluxed solid solders for electronic soldering applications, and her contributions to the 2017-2018 Technical Program Committee.

Brook Sandy-Smith is a technical support engineer based at Indium Corporation’s global headquarters in Clinton, New York and a leader in the industry for technical knowledge and support. Specializing in PCB assembly materials, she works closely with customers to develop custom solutions to optimize their processes. Sandy-Smith is an SMTA Certified Process Engineer and has a passion for developing and implementing standardized test methods. She is an active member of several IPC committees, SMTA programs, and iNEMI projects, and is currently serving as chair of the J-004 committee and Vice President of technical programs for the SMTA Empire chapter. Sandy-Smith graduated from the International Engineering Program at the University of Rhode Island with a degree in Chemical Engineering and German language.

About Indium Corporation

Indium Corporation is a premier materials manufacturer and supplier to the global electronics, semiconductor, thin-film, and thermal management markets. Products include solders and fluxes; brazes; thermal interface materials; sputtering targets; indium, gallium, germanium, and tin metals and inorganic compounds; and NanoFoil®. Founded in 1934, the company has global technical support and factories located in China, Malaysia, Singapore, South Korea, the United Kingdom, and the USA.

For more information about Indium Corporation, click here.

Share


Suggested Items

Modeling an SMT Line to Improve Throughput

06/06/2018 | Gregory Vance, Rockwell Automation Inc., and Todd Vick, Universal Instruments Corp.
One of the major challenges for an electronics assembly manufacturing engineer is determining how an SMT machine will impact throughput. Typically, an SMT equipment supplier will ask for a few products to simulate the throughput capability of their machine. Unfortunately, if the engineer works in a high-mix, low-volume environment, he may need to know the impact of a new machine on 1,000 or more products.

RTW IPC APEX EXPO: Indium's Brook Sandy-Smith on PMI-Squared

05/25/2018 | Real Time with...IPC
Indium Corporation's Brook Sandy-Smith discusses ionic process residues on PCB assemblies and introduces the concept of "PMI-squared" (process material interaction investigation), the topic of an IPC Technical Buzz Session at IPC APEX EXPO 2018.

RTW IPC APEX EXPO: Inspection Technology Developments

05/22/2018 | Real Time with...IPC
Brian D'Amico, president of Mirtec Corp., speaks with I-Connect007 Technical Editor Pete Starkey about the challenges of miniaturization, increasing component density, and the shadowing of small components by taller ones, and how Mirtec has developed its inspection technology to ensure they remain at the leading edge.



Copyright © 2018 I-Connect007. All rights reserved.