RTW IPC APEX EXPO: How Smart Factories Will Revolutionize Electronics Manufacturing

Reading time ( words)

KIC president Bjorn Dahle discusses the smart manufacturing trend in the electronics assembly industry, and how KIC can help their customers with smart manufacturing transitions. Dahle also discusses the importance of the CFX demonstration at IPC APEX EXPO 2018, and its impact in the electronics manufacturing industry.

To watch the interview, click here.


Suggested Items

5 Techniques Used to Detect Counterfeit Electronic Components

03/16/2018 | Danielle Olivier, JJS Manufacturing
Although government pressure and private resources have helped minimize the risk of counterfeit components from entering the supply chain, there is still and will most likely continue to be, a prominent threat. So, what can you do to minimize this risk? Read on.

Manufacturability: Pad Relief and Mask Relationship to Solder Joint Volume

03/09/2018 | Ken Horky, Peterson Manufacturing
Electronic assembly thermal management has always been an issue but has become more significant as we pack more power and function into a smaller form factor. In recent years, the growing use of LEDs for illumination on a large scale has presented additional thermal demands.

Your Competitors are Outsourcing Their Manufacturing; Shouldn’t You?

03/08/2018 | Neil Sharp, JJS Manufacturing
As an OEM, you will be focused on increasing sales and maximizing profits. But you can only sell what you can produce, and manufacturing complex industrial electronic products day in, day out can be a headache. As your sales start to climb, you move closer to hitting your internal capacity limits. Here's how EMS providers can help you become successful in your manufacturing.

Copyright © 2018 I-Connect007. All rights reserved.