-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueOpportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
Manufacturing Know-how
For this issue, we asked our expert contributors to share their thoughts on the absolute “must-know” aspects of fab, assembly and test that all designers should understand. In the end, we’re all in this together.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
South African Electronics Industry Going Strong
April 3, 2018 | Barry Matties, I-Connect007Estimated reading time: 3 minutes
EDA Technologies is a South African company that offers PCB design engineering services, mainly for the domestic electronics market, which makes up a surprising 12.5% of South Africa’s GDP. I recently spoke to founder Nechan Naicker about the benefits of outsourcing to South Africa, the market segments they service there, and any advice he had to offer from his 20+ years in the industry.
Barry Matties: First, tell our readers a little bit about your company and what you do?
Nechan Naicker: EDA Technologies is a concept-to-complete electronics solutions company founded over 20 years ago. We've always been involved with PC boards. Back in the day we sold and supported P-CAD, one of the earliest PCB design tools working on DOS, developed by IBM for their own use and later sold off. PCAD changed owners numerous times and evolved until what we have today in Altium Designer. Over the 20 years of selling and supporting PCB CAD tools, we’ve obviously done a lot of training.
Being at the bottom tip of Africa, people always imagine that we have lions running around in the streets. They do sometimes, but thankfully not where I live. What's interesting is that most of the people that I speak to have no idea how advanced South Africa’s electronics industry is. To give you an idea, a large part of SAAB’s electronics engineering is done in South Africa, employing a few hundred engineers. We have many hundreds of engineering contacts in our database, so I would say that South Africa has a thriving and advanced electronics industry.
Matties: Expand a little on EDA Technologies and the services you offer.
Naicker: Originally, we started as a PCB design house, but then we also started to sell and support PCB CAD tools. Today we offer turnkey electronics engineering and manufacturing services, using local and global manufacturers. Many companies don't have the expertise or the resources in-house to do full electronics development, so that's where we come in. We look after the full development and supply chain so that clients can focus on their core business.
Matties: And you're selling the tools as well?
Naicker: Yes, so we have been a reseller for Altium in South Africa for many years. Altium is the most widely used PCB tool in South Africa. Since we have also used Altium Designer to design exceptionally complex designs, our understanding of the tool is of the highest level so that we can quickly assist our customers with support.
Matties: My understanding is that the Chinese bring a lot of investment and infrastructure into this region as well, such as highways. Is that the case?
Naicker: Yes. Africa is rich in minerals, so copper is a big commodity along with other sought-after minerals. The Chinese investors have purchased entire mineral mines in parts of Africa, like Botswana. In exchange, they may build roads and put up some infrastructure.
Matties: You've been doing design for many years. What sort of design changes have you seen over the years that surprised you?
Naicker: EDA has been designing and manufacturing multilayer PCBs of 12 layers and above for over 15 years now, so this is nothing new. I would say that the technology that intrigued me most recently was the need for embedded copper coin technology. Due to high power demands in electronic systems like RF designs, there's a big need for embedded copper in the PCB to handle the heat distribution and large currents. So, manufacturers mill out a piece of the PCB, insert precisely crafted copper in the cavity, plate over it, and the result is one of the best thermal conductivity solution available on PCBs.
To read this entire interview, which appeared in the March 2018 issue of Design007 Magazine, click here.
Suggested Items
IMI Taps New Opportunities to Sustain Grit in China
03/28/2024 | IMIIntegrated Micro-Electronics, Inc. (IMI), Joey S. Bantatua, IMI China’s head of operations and general manager was recently interviewed by Asia Electronics Industry (AEI) magazine where he talked about the prospects of the country both as a market and a production hub.
Kimball Electronics Publishes Annual Sustainability Disclosures with its 2023 Guiding Principles Report
03/28/2024 | BUSINESS WIREKimball Electronics, Inc. published its annual sustainability disclosures in its 2023 Guiding Principles Report, themed “How We Are Winning Together The Kimball Way.”
iNEMI Webinar: Humidity Robustness and Insulation Coordination for e-Mobility
03/27/2024 | iNEMIThis webinar is a follow-up to the recent Seminar on Humidity Robustness and Insulation Coordination for e-Mobility, organized by iNEMI and ZESTRON Europe and supported by the ECPE.
Electronics Industry Sentiment Rises in March
03/27/2024 | IPCIPC releases March 2024 Global Sentiment of the Electronics Supply Chain Report
Mycronic to Showcase More Versatile, High-productivity Assembly Solutions at IPC APEX EXPO 2024
03/27/2024 | MycronicMycronic, the leading Sweden-based electronics assembly solutions provider, will continue to respond to growing customer demand for high-flexibility, high-productivity solutions for zero-defect PCB assembly at IPC APEX EXPO 2024 in Anaheim, CA on April 9 - 11.