APCT Moves into Rigid-Flex with Cartel, Cirtech Acquisition


Reading time ( words)

When I spoke with APCT President Steve Robinson a year ago, he said he was interested in adding flex and rigid-flex capabilities, and working closely with designers and engineers. With the recent acquisition of Cartel and their subsidiary Cirtech, APCT now has a flex and rigid-flex facility, along with military and aerospace certifications. At DesignCon 2018, I asked Steve to discuss these acquisitions and what they mean for APCT and their customers.

Andy Shaughnessy: Steve, good to see you again. Now, as the top guy at APCT…

Steve Robinson: I’m the head janitor. I clean up all the messes [laughs].

Shaughnessy: That’s right. Steve, give us a quick background on APCT.

Robinson: APCT was founded in 2008. It was Advanced Printed Circuits before that. This will be the 37th year of that facility and that operation. When I left Merix, I acquired this operation and we’ve been focusing on a high level of advanced technology and high engineering support for over eight years now. Business has been great, and we’ve been very fortunate. I think we picked the right market segment and the right business model that we gleaned at the time. We just had a nice start to 2018 with another acquisition.

Shaughnessy: Tell us about this acquisition.

Robinson: We acquired two business entities. First, Cartel Electronics, run by Bruce McMaster in Orange County, California is a rigid medium-to-advanced technology manufacturer, a high-mix commercial factory. Then we acquired an affiliate of theirs, Cirtech, which has a market niche: defense aerospace, military-focused, with high-level certification, and flex and rigid-flex as well. One of my charters in 2017 was to provide a solution for our customers in the flex and rigid-flex arena. And I was happy to get this deal done; we started on it in August 2017 and finally closed in January 2018. It’s nice to have the additional capacity and depth from the Cartel team, along with the additional offering of the flex and rigid-flex. The defense and aerospace certifications of Mil-P-55110 and 31032 were high-value targets, and to be honest, it was easier to acquire than it was to implement them in my current operations. So, we chose that path.

Shaughnessy: So you don’t have to train anyone...

Robinson: Yes, you don’t have to change the culture of your specific factories either. One is a high-reliability facility, a little bit more meticulous with its focus, while the other facilities are more advanced technology-focused and speed-focused. Stopping to complete 20 pages of paperwork every other day is kind of cumbersome to our task of quick turn, but both strive for high reliability.

And I’m really excited to introduce our quick-turn culture into those arenas. In the initial month, I’ve been meeting with customers, especially the flex and rigid-flex. Even in the defense and aerospace segments, the technologies are evolving very quickly, and there’s a shortage of suppliers. So when you have our established, high-reliability factory and now you introduce our advanced technology, quickturn capabilities, our meetings have been pretty eye-opening. Customers now know that they have a source that they can go to that offers a broader range of technology for them. Because they’re being pressured, the defense industry is the same as ours—smaller, thinner, lighter, faster, more economical, more affordable, and more efficient. And so that’s driving smaller, tighter lines, smaller features, everything that embraces the advanced technology space that APCT has niched itself in.

So far the feedback’s been tremendous, and the customer interest is through the roof compared to what we expected. So it’s really good. We’re really excited about it, looking forward to the rest of 2018 and working with it. As I said before, as with any acquisition, you don’t buy a company; you buy the team. I’m excited about the depth of the team, and the experience they have. Many of these people have been building printed circuit boards in their industry niche for 20–30 years, so it adds tremendous depth to APCT. It still is just people working with people, so to have a huge surplus of industry veterans is something special.

Bruce McMaster has been one of the top leaders of our industry for years, since the DDI days. John Stein is running our Cirtech operations, and he has many years in the design and manufacturing of flex and rigid-flex. I thought my team was the strongest team in the industry prior to this, so it’s really exciting for me. As CEO, my job is team building, right? I put the best players on the field and have a good game strategy, and then execute with a good team. I am about to roll the PCB Patriots into the circuit board industry.

To read the full version of this interview which appeared in the April 2018 issue of FLEX007 Magazine, click here.

Share


Suggested Items

Help Wanted: PCB Design Layout Specialist

08/10/2018 | Mike Creeden, San Diego PCB
I was told recently that the designer, aka the PCB layout specialist, is a dying breed soon to be extinct. I wish to reassure my fellow designers that, in my opinion, you are in the catbird seat. You are in hot demand and you should have great opportunities for the remainder of your career. By the way, after reading this article, you may feel empowered to go ask for a raise. Please don’t tell your manager that I sent you!

CPCA 2018 Seminar Overview

07/24/2018 | Happy Holden, I-Connect007
I had the good fortune to speak at a seminar sponsored by the CPCA and organized by the China Team of I-Connect007 in Shanghai. This full-day seminar was on one of today’s hot topics, “Automation in PCB Manufacturing.”

Estonia a Hot Spot for New Technology

04/23/2018 | Andy Shaughnessy, Design007 Magazine
Most Westerners know very little about Estonia. A former Soviet Bloc country, Estonia has come a long way since restoring its independence in 1991. Electronics companies are thriving in this tiny EU member country, and capital city Tallinn has been called “Silicon Valley on the Baltic Sea.” During productronica, I met with Arno Kolk, general manager of the Estonian Electronics Industries Association, and we discussed the explosion of new technology in this “Baltic Tiger” country?



Copyright © 2018 I-Connect007. All rights reserved.