-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Faster Board Speeds Demand Constraint-Driven Design
June 19, 2018 | Ralf Bruening, ZukenEstimated reading time: 2 minutes
Do you still use Post-it Notes? Invented in 1979, this simple, yet incredibly powerful communication mechanism is still commonly found in engineering and design departments. Despite modern electronic communication, many companies still struggle to provide a replacement for their ease-of-use and versatility.
But, by changing the way an engineer designs electronics, by giving up the Post-it for passing requirements, change requests and constraints between engineers, design times can be shortened and product quality improved. Modern PCB design tools permit the definition of design constraints, including constraints relating to high-speed design and EMC, such as the topology of connections (routing pin sequence) or overshoot and timing budgets, for example.
These constraints become increasingly important as components and boards become faster and more complex. But it is hard to capture and use/obey these constraints consistently throughout the complete design process, bearing in mind that may contradict each other. The Post-it Note captures this idea particularly well. A brief sketch implicitly includes the constraints that the designer is working under, in a very concise form; however retaining and using this information later is extremely difficult.
Adaptive Design
Using these powerful constraint techniques can be a double-edged sword. While the design process is made much safer by including constraints, it is all too easy to over-constrain the design and make it impossible to complete routing and placement. Even paper design guidelines can make products uneconomic to produce unless a great deal of engineering knowledge is applied during the design. This means the design tool has to be adaptive—reacting to changes in the design as it progresses. Combining these elements is anything but trivial, but doing so allows the designer to converge on the optimum design in the first pass, rather than via multiple attempts.
In PCB design, attributes (or constraints) and rules have always existed, and designers have tried to achieve their design goals, especially with systems that are based around the raw attributes of the components in a design. But attributes (or properties) are essentially just data about the pins, components or tracking, while constraints are requirements that must be obeyed. Examples include the maximum delay, or an error marker, which must be flagged as functional or an operation may be at risk. These can simply be a function of the design attributes, but constraints are typically more complex nowadays and they sometimes relate to each other (e.g., in high-speed memory the relationship between the byte lanes and from the data/address signals to strobe and clock signals). Constraints must exist through the different stages of the design process, from schematic to placement to routing.
To read this entire article, which appeared in the May 2018 issue of Design007 Magazine, click here.
Suggested Items
iNEMI Packaging Tech Topic Series: Role of EDA in Advanced Semiconductor Packaging
04/26/2024 | iNEMIAdvanced semiconductor packaging with heterogenous integration has made on-package integration of multiple chips a crucial part of finding alternatives to transistor scaling. Historically, EDA tools for front-end and back-end design have evolved separately; however, design complexity and the increased number of die-to-die or die-to-substrate interconnections has led to the need for EDA tools that can support integration of overall design planning, implementation, and system analysis in a single cockpit.
Cadence, TSMC Collaborate on Wide-Ranging Innovations to Transform System and Semiconductor Design
04/25/2024 | Cadence Design SystemsCadence Design Systems, Inc. and TSMC have extended their longstanding collaboration by announcing a broad range of innovative technology advancements to accelerate design, including developments ranging from 3D-IC and advanced process nodes to design IP and photonics.
Ansys, TSMC Enable a Multiphysics Platform for Optics and Photonics, Addressing Needs of AI, HPC Silicon Systems
04/25/2024 | PRNewswireAnsys announced a collaboration with TSMC on multiphysics software for TSMC's Compact Universal Photonic Engines (COUPE). COUPE is a cutting-edge Silicon Photonics (SiPh) integration system and Co-Packaged Optics platform that mitigates coupling loss while significantly accelerating chip-to-chip and machine-to-machine communication.
Siemens’ Breakthrough Veloce CS Transforms Emulation and Prototyping with Three Novel Products
04/24/2024 | Siemens Digital Industries SoftwareSiemens Digital Industries Software launched the Veloce™ CS hardware-assisted verification and validation system. In a first for the EDA (Electronic Design Automation) industry, Veloce CS incorporates hardware emulation, enterprise prototyping and software prototyping and is built on two highly advanced integrated circuits (ICs) – Siemens’ new, purpose-built Crystal accelerator chip for emulation and the AMD Versal™ Premium VP1902 FPGA adaptive SoC (System-on-a-chip) for enterprise and software prototyping.
Listen Up! The Intricacies of PCB Drilling Detailed in New Podcast Episode
04/25/2024 | I-Connect007In episode 5 of the podcast series, On the Line With: Designing for Reality, Nolan Johnson and Matt Stevenson continue down the manufacturing process, this time focusing on the post-lamination drilling process for PCBs. Matt and Nolan delve into the intricacies of the PCB drilling process, highlighting the importance of hole quality, drill parameters, and design optimization to ensure smooth manufacturing. The conversation covers topics such as drill bit sizes, aspect ratios, vias, challenges in drilling, and ways to enhance efficiency in the drilling department.