Dave Wiens Discusses Multi-board Design Techniques


Reading time ( words)

For our multi-board design issue, I interviewed Dave Wiens, product marketing manager for Mentor, a Siemens business. We discussed how the multi-board design technique differs from laying out single boards, along with the planning, simulation and analysis processes required to design multi-board systems. 

Andy Shaughnessy: Dave, what are some of the typical end products that might use multiple PCBs?

Dave Wiens: The easy answer is almost every end product that includes electronics is a multi-board system. It's things down to your cell phone. If you look up your cell phone on iFixit, you'll see a tear down that's got multiple boards in there. At a minimum, there'll be, let's say a separate board for the camera or for the audio or for the external connections. Those are all separate functions and, in some cases, when somebody's designing they won't necessarily design all of those pieces. They might, for instance, be acquiring the camera from somebody else, and so that basically represents a component. It is a complete PCB, but to them it's a component because they didn't design it. We're not necessarily talking big back planes, with tons and tons of data cards on them. Certainly, that's a multi-board system, but pretty much everything you see today is multi-board.

I don't know about you, but when something in my house stops working, I tend to tear it apart. Sometimes I'm trying to figure out if I can fix it, but often I just want to see how they designed it. Really, when you're designing something and making decisions to make it into multiple boards, you start thinking about things like size and space. Should I put this all on one board? Should I break it up into multiple boards for space reasons? Should I do it because of reliability reasons? If this data board fails, it's easier to plug and play it with something else versus throwing away the whole system. Should I do it for cost reasons? Performance reasons? And then there's the make versus buy decision, right? For this particular function of my system, should I just buy a board and connect it to my system? Or should I design it into the system?

You see that with like your home PC. It's got dedicated graphics built into it now, but you still may want to put an add-on graphics card, but those used to be things that weren't necessarily integrated into one system. They've done that over time.

Shaughnessy: It sounds like some of the biggest challenges are the trade-offs you have to decide. Like, should you add another board? What are some of those challenges?

Wiens: Yes, the trade-offs are a huge one and, frankly, because of that a lot of people kind of avoid it. I mean, they make decisions very early on to segment something. They take their high-level requirements, and then they start building an architecture from that. They decide what's going to be hardware, what's going to software, and how that's going to interplay with mechanical structures, cabling structures, all of that is decided way up front, and then the question is: Do they ever revisit that? If they don't revisit it, then they were either really good and they got it right up front, or as the design progressively refines itself, as the engineers refine it from that high-level architecture down into the physical implementations, they may find things.

To read this entire interview, which appeared in the June 2018 issue of Design007 Magazine, click here.

Share

Print


Suggested Items

Altium Prepares for Munich Show as Growth Continues

01/17/2019 | Andy Shaughnessy, Design007 Magazine
It’s been just two months since the AltiumLive event drew several hundred designers to San Diego, California, and Altium is already gearing up for the next show in Munich, Germany (January 15–17, 2019). I recently spoke with Chris Donato, VP of global sales for Altium, about the upcoming AltiumLive show as well as the company’s growth over the past few years.

January 2019 Issue of Design007 Magazine Available Now

01/15/2019 | I-Connect007
The component shortage is getting crazy. Some PCB designers are finding their favorite capacitors on 50-week and 80-week lead times, or worse. How do you design a board today when the components you need won’t be available for a year or more? In the January 2019 issue of Design007 Magazine, we asked our expert contributors to explain the current component shortage, as well as some of the workarounds that can help you get your next design out the door sooner rather than later.

A Fractal Conversation with Jim Howard and Greg Lucas

01/15/2019 | Barry Matties and Andy Shaughnessy, I-Connect007
Veteran PCB technologists Jim Howard and Greg Lucas have made an interesting discovery: Certain shapes of copper planes make a PCB run more efficiently than other shapes, a process they dubbed fractal design. It doesn’t appear to cost a penny more, and testing suggests that fractal design techniques could eliminate edge noise. Barry Matties and Andy Shaughnessy asked Jim and Greg to discuss the fractal design process, and the advantages of using this technique.



Copyright © 2019 I-Connect007. All rights reserved.