Industry Overshooting Capital Spending Needs for NAND Flash Memory
July 10, 2018 | IC InsightsEstimated reading time: 1 minute
Overspending by the major NAND suppliers expected to further cool NAND flash prices this year. The figure compares the estimated required capex needed to increase NAND flash bit volume shipments 40% per year, sourced from a chart from Micron’s 2018 Analyst and Investor Event in May of this year, versus the annual capex targeting the NAND flash market segment using IC Insights’ data. As shown, Micron believes that the industry capex needed to increase NAND flash bit volume production by 40% more than doubled from $9 billion in 2015 to $22 billion only two years later in 2017! This tremendous surge in required capital is driven by the move to 3D NAND from planar NAND since 3D NAND requires much more fab equipment and additional cleanroom space to process the additional layers of the device as compared to planar NAND.
Most of the five major NAND flash suppliers have stated that they believe that NAND bit volume demand growth will average about 40% per year over the next few years. Figure 1 shows that the capex needed to support a 40% increase in NAND bit volume shipments was exceeded by 27% last year and is forecast to exceed the amount needed by another 41% this year (NAND bit volume shipments increased 41% in 2017 but 1H18/1H17 bit volume shipments were up only 30%). As a result, it is no surprise that NAND flash prices have already softened in early 2018. Moreover, the pace of the softening is expected to pick up in the second half of this year and continue into 2019.
Historical precedent in the memory market shows that too much spending usually leads to overcapacity and subsequent pricing weakness. With Samsung, SK Hynix, Micron, Intel, Toshiba/Western Digital/SanDisk, and XMC/Yangtze River Storage Technology all planning to significantly ramp up 3D NAND flash capacity over the next couple of years (with additional new Chinese producers possibly entering the market), IC Insights believes that the risk for significantly overshooting 3D NAND flash market demand is very high and growing.
Suggested Items
Commercial Demand Continues to Be the Main Driver of Personal Computing Device Shipments into the GCC Region
03/26/2024 | IDCThe Gulf Cooperation Council (GCC) personal computing device (PCD) market, which is made up of desktops, notebooks, and workstations, declined 4.0% year on year in 2023, with high inventory levels and reduced consumer spending the primary causes.
Suppliers Aim to Raise Contract Prices, But With Uncertain Demand, 2Q24 DRAM Price Increase Expected to Narrow to 3–8%
03/26/2024 | TrendForceTrendForce’s latest report reveals that despite DRAM suppliers’ efforts to trim inventories, they have yet to reach healthy ranges. As they continue to improve their lose situations by boosting capacity utilization rates, the overall demand outlook for this year remains tepid.
LPKF Reports Strategic Successes and Narrowly Achieves Forecast for 2023 Financial Year
03/26/2024 | LPKFLPKF Laser & Electronics SE generated revenue of EUR 124.3 million in the financial year (previous year: EUR 123.7 million) and earnings before interest and tax (EBIT) of EUR 3.7 million (previous year: EUR 6.8 million), putting the EBIT margin at 3.0% (previous year: 5.5%).
Arlon EMD and EMC Announce Expansion in California
03/25/2024 | Arlon EMDArlon EMD, a division of Elite Materials Company (EMC), announces a factory expansion at the Rancho Cucamonga, CA location. Arlon is a global leader in high performance thermoset substrates for mission critical printed circuit boards manufactured for high endurance and long-life programs. Arlon has a 45-year history of manufacturing specialty materials for the Aerospace, Industrial and Military (AIM) markets.
Intraratio Enhances MES + Yield / IoT Management with New Advanced Manufacturing Analytics
03/22/2024 | IntraratioIntraratio announced AICard, which harnesses the power of artificial intelligence and machine learning to empower manufacturers to make informed decisions quickly and accurately regarding product quality and manufacturing line performance and optimization.