Managing Heat in Your PCBs


Reading time ( words)

Electronics are designed and built to be sustainable, but where there is light there must be shadow and this shadow is called "heat" in electronics.

So how can we reduce the thermal stress on components to secure the safety and reliability of electronics?

In order to prevent the components from overheating, it is necessary to get rid of unwanted heat and cool them down. Thermal management is key for high powered components which generate a lot of heat such as: LED applications, voltage regulators or electronic motor controls.

One option of thermal management is to assemble a heat sink directly on components to absorb excessive heat. Overall, this procedure would mean additional effort during assembly.

Alternatively the PCB itself can be a cooling solution, for example by using laminates with high thermal conductivity (1−5 W/mK compared to 0,3 W/mK on standard FR-4).

About CML

CML offers various PCB solutions including aluminum substrate, copper substrate; flex on aluminium or copper, post bonded heatsinks, copper inlay, aluminium nitride inlay, thermal vias/microvias (drilled/lasered); heavy copper.

 

Share


Suggested Items

The PCB Norsemen: The Velocity of Technology— What Does It Really Mean?

07/02/2018 | Jan Pedersen, ELMATICA
Driving a car is probably one of the areas where the user comes in direct touch with the technology development. And we understand the speed when we see how fast we get new versions of smartphones and other gadgets. But in what direction are we going?

Embedding Components, Part 1

06/30/2017 | Vern Solberg, Consultant
The printed circuit has traditionally served as the platform for mounting and interconnecting active and passive components on the outer surfaces. Companies attempting to improve functionality and minimize space are now considering embedding a broad range of these components within the circuit structure.

Embedding Active and Passive Components in Organic PCBs for More Reliability and Miniaturization

06/20/2017 | Thomas Hofmann, HOFMANN LEITERPLATTEN GMBH
Hofmann Leiterplatten GmbH has developed a wide range of products in the last 25 years. New manufacturing know-how has been developed in fabricating organic PCB with embedded devices. A special name, AML (active multilayer), was created to differentiate the surface mount devices (SMD) and the device embedded technology (DET) PCBs. Manufacturing processes that are not typical for standard PCB fabrication shops has been developed.



Copyright © 2018 I-Connect007. All rights reserved.