Light, Finely Sliced
July 16, 2018 | A*STAREstimated reading time: 2 minutes
A plan to incorporate a third bent waveguide into a silicon-based light splitter led A*STAR researchers to develop a device capable of a 30-fold improvement in splitting efficiency. The novel on-chip light splitter marks a major breakthrough in improving high-performance data transmission systems, as well as applications in quantum computing.
The manipulation of light in micro-scale devices is a fundamental pillar of high-speed optical circuits underpinning communications and next-generation technologies like quantum computing. Light is fast and low-power, and can be encoded to transmit data in a variety of ways. As Thomas Ang from the A*STAR Institute of High Performance Computing (IHPC) explains, for these manipulations to be reliable and efficient, the light needs to be as ‘pure’ as possible — not just tightly confined around a specific wavelength, but also of a uniform polarization.
“Light consists of a mixture of two polarization components,” Ang says. “Polarization beam splitters are used to separate a mixed-polarization beam into two channels for each polarization.”
When the splitting is imperfect, the two channels can contain small proportions of the opposite polarization, an effect known as crosstalk.
“Polarization beam splitters with low crosstalk are very important for high signal fidelity in high-speed optical interconnect applications,” says Jun Rong Ong, Ang’s partner in the study. “Current technology is limited to a crosstalk level, called the extinction ratio, of around 25 decibels, which is high enough to affect high-speed data transmission.”
The field of polarization beam splitters (PBSs) is well-developed, and there have been many attempts to break this 25 decibel limit in silicon-based devices as the industry standard for fabrication. Ang, Ong and their colleagues brainstormed ways to challenge this limit, and came up with the idea of adding a third waveguide — essentially a channel or path to route light on a chip — when the status quo dictated no more than two.
“We were interested in waveguides for bending and routing light, and conceptualized our new design after brainstorming within our team,” says Ang. “We tested our hypothesis using computer simulations and were thrilled to find that the device outperformed some of the best-in-class published results.”
Working with collaborators at the Singapore University of Technology and Design, the team then fabricated the three-waveguide device (see image) and confirmed its vastly improved extinction ratio of 40 decibel, representing a further 30-fold reduction in polarization crosstalk.
“We also expect that the device can be improved further by optimizing its design,” says Ong.
Suggested Items
Signal Integrity Expert Donald Telian to Teach 'Signal Integrity, In Practice' Masterclass Globally
04/17/2024 | PRLOGDonald Telian and The EEcosystem announce the global tour of "Signal Integrity, In Practice," a groundbreaking LIVE masterclass designed to equip hardware engineers with essential skills for solving Signal Integrity (SI) challenges in today's fast-paced technological landscape.
Designing Electronics for High Thermal Loads
04/16/2024 | Akber Roy, Rush PCB Inc.Developing proactive thermal management strategies is important in the early stages of the PCB design cycle to minimize costly redesign iterations. Here, I delve into key aspects of electronic design that hold particular relevance for managing heat in electronic systems. Each of these considerations plays a pivotal role in enhancing the reliability and performance of the overall system.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
04/12/2024 | Nolan Johnson, I-Connect007As we publish this week’s most-read news, the I-Connect007 team is wending its way home from an eventful and productive week at IPC APEX EXPO in Anaheim, California. We’ve posted a variety of dispatches from the show this week, released 73 realtimewith.com video interviews (and counting), and also gathered the content and updates you’ll be looking for in the upcoming issue of Show & Tell… IPC APEX EXPO 2024.
Material Insight: The Importance of Standards for the Chip Packaging Industry
04/12/2024 | Dr. Preeya Kuray -- Column: Material InsightI had the great pleasure of recently attending the National Institute of Standards and Technology’s (NIST) CHIPS R&D Chiplets Interfaces Technical Standards Workshop. The purpose was to bring together technical experts across industry and academia to deliberate one of the most pressing technological matters of 2024: chip packaging standards.
What’s New in Design Education at IPC APEX EXPO?
04/11/2024 | Kelly Allen, IPC Training ManagerKelly (Kel) Allen shares her thoughts on the educational offerings at IPC APEX EXPO and beyond. In this interview, she discusses some of the newest classes taking place during the conference in Anaheim, covering everything from design, fab, and assembly through mil/aero, test, and supply chain issues.