Indium Expert Hosts Webinar on Innovative Metal Thermal Interface Materials


Reading time ( words)

Indium Corporation’s Tim Jensen, product manager for Engineered Solder Materials, will host a one-hour Thermal Live webinar at 10 a.m. EST on October 23 regarding Innovation Metal Thermal Interface Materials to Maximize Heat Dissipation.

Jensen will discuss how metal-based thermal interface materials (TIMs) are proving to be an attractive option in electronics assembly because of their high z-direction thermal conductivity. Many recent innovations have led to great strides in improving interfacial resistance, heat dissipation, and longer life during power cycling. Jensen will review these innovations and examine why they make metal TIMs the most attractive option for high-reliability applications, such as TIM 1, TIM 2, IGBT, LED, and other applications.

Jensen is an SMTA-certified process engineer. He has more than 20 years of experience working with customers troubleshooting and optimizing SMT process lines and solving defects, such as head-in-pillow, graping, and QFN voiding. Jensen has worked directly on hundreds of surface mount lines and developed a number of different products. Using that direct knowledge and expertise, he works closely with Indium Corporation’s technical service, sales, and research and development teams to develop cutting-edge products that address the unique challenges faced by the electronics assembly industry. As senior product manager, Jensen is responsible for Indium Corporation’s most diverse product group, which includes solder preforms, wire, ribbon and foil, as well as thermal interface materials. He earned his bachelor’s degree in chemical engineering from Clarkson University and his master’s in business administration from Syracuse University.

About Indium Corporation

Indium Corporation is a premier materials manufacturer and supplier to the global electronics, semiconductor, thin-film, and thermal management markets. Products include solders and fluxes; brazes; thermal interface materials; sputtering targets; indium, gallium, germanium, and tin metals and inorganic compounds; and NanoFoil®. Founded in 1934, the company has global technical support and factories located in China, Malaysia, Singapore, South Korea, the United Kingdom, and the USA.

For more information about Indium Corporation, click here.

Share

Print


Suggested Items

Impact of Stencil Foil Type on Solder Paste Transfer Efficiency for Laser-cut SMT Stencils (Part 1)

04/24/2019 | Greg Smith, BlueRing Stencils
As innovation and demand continue to drive miniaturization in electronics, manufacturers face the constant challenge of assembling smaller and smaller components with repeatable processes and high yields. Stencil printing is the first step in the PWB assembly process, and improvements to the SMT stencil can significantly improve yields, especially for more challenging miniaturized products. The primary inputs in the SMT stencil manufacturing process are material, equipment, and processes, and by continuously improving these inputs, the overall print process is improved. The most important material in the process of manufacturing SMT stencils is the foil itself. This article investigates foil types used with the goal of determining which foils provide the best print performance.

Tips & Tricks: Water Contamination and Flux Expiry

04/17/2019 | Jason Fullerton, MacDermid Alpha Electronics Solutions
Solder joints that form properly are not expected to exhibit reduced reliability. However, a higher number of defects created tends to lead to a higher chance that defective connections escape detection through inspection and functional testing, and that’s not a risk to be taken lightly.

Tips & Tricks: Humidity Level for Electronics Assembly

04/10/2019 | Jason Fullerton, MacDermid Alpha Electronics Solutions
Low relative humidity (RH) can allow for higher static charges to build on objects. It can also affect solder pastes, especially OR-class pastes, and this can reduce print performance and stencil life. Read on to find out what level of RH you need for your assembly facility.



Copyright © 2019 I-Connect007. All rights reserved.