KYZEN's Bixenman to Present Three Papers at SMTAI Technical Sessions


Reading time ( words)

KYZEN CTO Mike Bixenman, DBA, will present three papers during the technical sessions at SMTA International, scheduled to take place October 16–17, 2018 at the Donald Stephens Convention Center in Rosemont, Illinois.

Dr. Bixenman will present "The Effectiveness of 75% IPA/25% DI Extraction Solution on No-Clean Flux Residues," co-authored by David Lober, KYZEN and; Marietta Lemieux and Mark McMeen from STI Electronics. The presentation will take place during Session HE4, entitled, "Improving Manufacturing Process to Provide Better Survivability of Electronic Products" on Monday, October 15, 2018 from 3:30- 6 p.m. in Room 46.

The presentation entitled "Selective Soldering Design for Reliability Using a Novel Test Board and SIR Test Method" will take place during Session FSA3, "Considerations for Assuring Reliable Assemblies," on Wednesday, October 17, 2018 from 8–10 a.m. in Room 49. The paper was co-authored by Mark McMeen, STI Electronics; Denis Jean, Kester Solder and; Joe Clure, Kurtz Ersa.

Finally, on Wednesday, October 17, 2018, Dr. Bixenman will present "SIR Characterization of No-Clean Flux Residues Under the QFN Component Using Different PCB Board Design Options" during Session MFX4, entitled "Manufacturing Operational Challenges" from 10:30 a.m. – 12 p.m. in Room 46. The paper was co-authored by David Lober, KYZEN and; Mark McMeen and Collin Langley from STI Electronics.

Dr. Bixenman has more than 25 years of experience in the design of electronic assembly cleaning materials and process integration. He has held the position of IPC/SMTA Cleaning Symposium Chair over the last 10 years and is the current chair of the IPC Cleaning Handbook Task Group. He holds four earned degrees including a Doctorate in Business Administration.

About KYZEN

KYZEN is a global leader in providing environmentally responsible, RoHS compliant precision cleaning chemistries for industries ranging from electronics and advanced packaging to metal finishing and aerospace applications. Since its founding in 1990, KYZEN’s innovative cleaning technologies, scientific expertise and customer support have been repeatedly recognized with the industry’s most prestigious awards. For more information, click here.

Share

Print


Suggested Items

3D Optical Inspection Provides ‘Eyes’ for Process Improvements in Industry 4.0

06/21/2019 | Jenny Yuh, Koh Young Technology, and Brent Fischthal, Koh Young America
Automated 3D solder paste inspection (SPI) and 3D automated optical inspection (AOI) systems have become an integral part of the printed circuit board assembly (PCBA) process because they help ensure high-quality production. As today’s board complexity is increasing, inspection technology has become even more critical.

Goepel electronic Solutions, Webinar Series, and Trends

06/19/2019 | Barry Matties, I-Connect007
Barry Matties catches up with Matthias Müller to chat about the wide range of test and inspection solutions currently being offered by Goepel electronic as well as the informative webinar series produced by the company to help further educate their customer base and promote technical discussion on a number of topics.

The Effectiveness of 75% IPA/25% DI Extraction Solution on No-clean Flux Residues

06/13/2019 | David Lober and Mike Bixenman, DBA, KYZEN; and Marietta Lemieux and Mark McMeen, STI
The continuous challenge in the electronics industry is to keep up with the demand for smaller, faster, and more reliable electronics. When it comes to cleaning, this rapid development of manufacturing and reliability challenges is juxtaposed with the slow pace of new test method development.



Copyright © 2019 I-Connect007. All rights reserved.