The Shape of Things to Come: Curved, Flexible, Stretchable, and Three-Dimensional Electronics
December 27, 2018 | Corné Rentrop, HOLST CENTREEstimated reading time: 2 minutes
The seamless integration of electronics into flexible, curved, and even stretchable surfaces is being requested for several markets, such as automotive (dashboards, lighting, sensors), smart buildings (lighting facades, air quality, solar panels), medical (health patches, X-ray, analysis), and smart clothing (position tracking, sports). The requirement for products that are light, take up less space, conformable, and easily integrated into an existing design will result in an improved user interface. Additionally, the product should be robust from a cost-effective process consuming less material, and the technology should be consistent with the Internet of Things (IoT) roadmap.
The Printed Electronics Concept
Printed electronics deliver smart surfaces for applications by creating printed circuits on polymer films and utilizing traditional graphical printing techniques, such as screen printing and inkjet printing, to create the circuitry on foils in sheet or roll form.
An obvious advantage of printing electronics is the speed that can be achieved. For example, there is roll-to-roll screen printing equipment at the Holst Centre that runs at a maximum speed of 60 metres per minute, creating seamless circuits directly onto a roll (Figures 1 and 2). Photonic sintering of the metal ink allows high operating speeds to be maintained at a controlled temperature of approximately 130°C to prevent the foils from melting. In combination with roll-to-roll printing, pick-and-place assembly technology can place electrical components on the roll. Conductive adhesives are usually used as interconnects.
Crossovers and vias can be printed by alternating conducting and dielectric layers, which can maintain a PCB-like structure, only now on a roll. All polymer foil materials are suitable substrates for printed electronics. Polyes ters—such as polyethylene terephthalate (PET) and polyethylene naphthenate (PEN), rubberlike material (thermoplastic polyurethane or TPU), and even paper—are known substrates for printed electronics. The low costs of these materials immediately show the second advantage of printed electronics.
A third benefit of printed electronics is the ability to change the form factor of the PCB. Foils are easy to shape into the desired form by bending, rolling, cutting, and laminating. In this way, the electronics can be integrated easily into examples like clothing, building, and on-body applications.
The prints can also be seamless, effectively with no beginning and no end, so that the size of the PCB is limited only by the length and width of the roll. LED foils are printed at the Holst Centre with a length of 300 m and a width of 30 cm. The LED foils have a pitch of 5 cm and are used as a wallpaper lighting source for indoor applications.
To read the full version of this article which originally appeared in the October 2018 issue of Flex007 Magazine, click here.
Suggested Items
Boeing's Janene Stinson Earns IPC Excellence in Education Award at IPC APEX EXPO 2024
04/22/2024 | IPCThe IPC Excellence in Education award was presented to Janene Stinson, Boeing, at IPC APEX EXPO 2024 in Anaheim, California, in recognition of her significant contributions to workforce development and leadership.
Zentech’s Board of Directors Announces the Return of Matt Turpin as President and CEO
04/22/2024 | Zentech ManufacturingTurpin draws upon over 35 years of experience in the electronics industry and has an 18-year history with Zentech. He previously served as President and CEO from 2006 to 2019 after which time he has remained active in the EMS industry as an advisor to Zentech and other industry organizations.
IDTechEx Report Unveils 3D Electronics Status and Opportunities
04/22/2024 | PRNewswire3D electronics is an emerging manufacturing approach that enables electronics to be integrated within or onto the surface of objects. 3D electronic manufacturing techniques empower new features, including mass customizability, greater integration, and improved sustainability in the electronics industry.
IDTechEx Examines the Opportunities for Wearables in Digital Health
04/19/2024 | IDTechExIDTechEx’s report, “Digital Health and Artificial Intelligence 2024-2034: Trends, Opportunities, and Outlook”, covers this ongoing trend in the consumer health wearables market and includes analysis of the opportunities and roadmap for biometric monitoring.
ZESTRON Welcomes Whitlock Associates as New Addition to their Existing Rep Team in Florida
04/19/2024 | ZESTRONZESTRON, the leading global provider of high-precision cleaning products, services, and training solutions in the electronics manufacturing and semiconductor industries, is thrilled to announce the addition of Whitlock Associates to its esteemed network of sales representatives.